Weldon AGN4

Manufacturer Weldon
Model AGN4
Year 2011
Country USA USA
Condition Good
Main category Metalworking Machinery
Subcategory CNC Lathe
ID P90611031

Weldon Model AGN4 CNC Cylindrical Grinder (Made in Japan by Tsugami)

New: 2011

Straight Wheel Design, can be changed to Angle head by Weldon if desired

"FANUC 0i-TD CNC Control
Cast iron machine base
Vee & flat pressurized way system
Combination live & dead spindle workhead
Workhead mounted diamond holder
Servo work drive
Hydromatic wheel spindle bearings
Power operated tailstock
14" X 2" wheel guard capacity
Full enclosure
Variable speed wheel drive with dynamic braking
Work area lighting
Workhead mounted diamond adapter"

General Specifications
Capacity
Max. Work Swing: 7"
Max. Distance Between centers: 10"
Max. Supportable Weight: 44 lbs.

Workhead
Work Speeds, variable: 0 - 1800 rpm
Center taper: #2 Morse
Workhead Spindle: live/dead spindle
Workhead thru hole: 0.625"


Wheelhead
Travel Distance: 6.7"
Rapid Traverse Rate: 320 inch/min
Programmable Feed Rate: 0.00001 - 200 inch/min
Straight or Angle: 0 or 30 degrees fixed
Wheel spindle bearings: hydrodynamic


Tailstock
Work center taper: #2 Morse
Quill travel distance: 1.2"
Quill advance/retraction: pneumatic

Grinding Wheel
Size (OD x width x ID): 14" x 2" x 5"
Standard surface speed: 8800 SFPM


Table
Travel Distance: 14"
Rapid-Traverse Rate: 640 inch/min
Programmable Feed Rate: 0.0001-200 inch/min
Swivel of Taper Adjust: +/- 1 Degree
Way Construction: ground, vee and flat pressurized

Motor
Work Spindle: 1.9 hp AC servo
Wheel Spindle: 5 hp T.E.F.C.
Wheel Spindle Lube: 1/10 hp
Hydraulic Oil: 1 hp
X and Z axis AC servo: 0.6 hp


Machine Dimensions and Construction
Dimensions: 58"W x 76"D x 74"H
Centerline of workpiece, height from floor: 41"
Weight: 4,600lbs.
Construction: Cast Iron
Foundation: 6" reinforced concrete floor required


Tank Capacities
Way lubrication oil tank: 1 gallon
Wheel spindle lubrication tank: 4 gallon

Lubrication
Wheel Spindle: Recirculating Hydraulic Oil
Ways: Recirculating Lube Oil
Ballscrews: Recirculating Lube Oil
Workhead Spindle: Permanent grease packed
Footstock: Recirculating Hydraulic Oil


Electrical Specifications
Standard Voltage: 208/240 volts, 3-phase, 60 Hertz, AC


Pneumatics
Air Pressure: 80 psi
Air Volume: 5 SCFM
Note: System requires a filtered and dry air source

CNC Control Specifications - FANUC 0i TD
Manual pulse generator
Full linear and circular contouring and positioning
FANUC digital and AC servo systems
Direct RPM programming or constant surface feet per minute
Built-in diagnostics
7.2" color LCD display
Macro subroutines
Automatic recognition of EIA or ISO coding
Decimal point programming
Absolute/Incremental programming
RS 232 interface
0.00010" command resolution
Automatic update of offsets
Program storage, 160 meters

** Excellent Condition & Appearance **

We add hundreds of new listings every week. Be sure not to miss any Weldon AGN4 by subscribing to our email updates.

We also send announcements for upcoming auctions for Metalworking Machinery.

We hate spam as much as you do

None