Specifications

Type of CNC
-------------------
Length x width x height 159.0 × 149.0 × 126.0
Weight 2722.32305 kg
Worked hours 1103 hours
Hours under power 1103 hours
State good
At local norms ---------
Status visible

Description

2022 Omax Maxiem 1515 Water Jet. Model M20, 20 HP waterjet pump with 1106 hours total run time since new. The water jet was installed 2/2022 by Omax.

Includes:

- Omax M20 Waterjet Pump

- 2021 Clemco Industries Corp. 6 cu ft. / 45 gallon blasting media hopper. Made in the USA

- Dell OptiPlex 7490 AIO Series workstation / CPU with Maxim Intel-VISOR software.

- Wheeled workstation / tool box

- Laminar Filter for water outflow

- Several new unused spare parts

- Eight unopened 55lb bags of Barton water jet abrasive


SPECS:

FOOTPRINT (WITH PUMP & CONTROLLER) 13' 3" x 12' 5" (4.04 m x 3.78 m)
HEIGHT (WITH WHIP PLUMBING) 10' 6"
OPERATING WEIGHT 14,114 lb
WEIGHT (TANK EMPTY) 6,000 lb
X-Y CUTTING TRAVEL* 5' 2" x 5' 2"
Z-AXIS TRAVEL 12"
TABLE SIZE 7' 4" x 5' 8"
MATERIAL SUPPORTS SLATS 4" x 14Ga Galvanized Steel
MAXIMUM SUPPORTED 300 lbs/sq ft
MATERIAL LOAD
ELECTRICAL REQUIREMENTS 3-Phase, 380-480 VAC ±10%, 50-60 Hz
SPEED 500 in/min (12.7 m/min)
LINEAR POSITIONAL ACCURACY ±0.003" (±0.076 mm)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2023
Offers online 11
Last activity Dec. 14, 2024

Description

2022 Omax Maxiem 1515 Water Jet. Model M20, 20 HP waterjet pump with 1106 hours total run time since new. The water jet was installed 2/2022 by Omax.

Includes:

- Omax M20 Waterjet Pump

- 2021 Clemco Industries Corp. 6 cu ft. / 45 gallon blasting media hopper. Made in the USA

- Dell OptiPlex 7490 AIO Series workstation / CPU with Maxim Intel-VISOR software.

- Wheeled workstation / tool box

- Laminar Filter for water outflow

- Several new unused spare parts

- Eight unopened 55lb bags of Barton water jet abrasive


SPECS:

FOOTPRINT (WITH PUMP & CONTROLLER) 13' 3" x 12' 5" (4.04 m x 3.78 m)
HEIGHT (WITH WHIP PLUMBING) 10' 6"
OPERATING WEIGHT 14,114 lb
WEIGHT (TANK EMPTY) 6,000 lb
X-Y CUTTING TRAVEL* 5' 2" x 5' 2"
Z-AXIS TRAVEL 12"
TABLE SIZE 7' 4" x 5' 8"
MATERIAL SUPPORTS SLATS 4" x 14Ga Galvanized Steel
MAXIMUM SUPPORTED 300 lbs/sq ft
MATERIAL LOAD
ELECTRICAL REQUIREMENTS 3-Phase, 380-480 VAC ±10%, 50-60 Hz
SPEED 500 in/min (12.7 m/min)
LINEAR POSITIONAL ACCURACY ±0.003" (±0.076 mm)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Type of CNC
-------------------
Length x width x height 159.0 × 149.0 × 126.0
Weight 2722.32305 kg
Worked hours 1103 hours
Hours under power 1103 hours
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2023
Offers online 11
Last activity Dec. 14, 2024

Here is a selection of similar machines

2022 Omax Maxiem 1515 Water Jet