Specifications

Nbr of rolls 3
Shaft diameter 60 mm
Type Horizontal
CNC no
CNC type
Bending speed 6 m/min
-------------------
Weight 1000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

-Profile bending roll- shafts output 60 mm
-brand MG Italy
-model AR60
-year 2001
-machine reversible can work with vertical shafts/horizontal shafts
-electric power 5,5 Hp on the hydraulic centralized unit
-voltage 380 /50

-output shafts 60 mm
-rollers diameter 215 mm
-rollers interchangeable in 3 pieces each shaft, adjustable for the different shape of profiles
-Powered driven the 3 shafts dragging with hydraulic motor and planetary gear-unit
-Dual rolling speed fast/slow
-Pinch pyramid configuration each shaft individual move hydraulic.
-Fully hydraulic side correctors / straighteners left and right side with double contrast rollers.
-Control panel movable on wheels, centralized commands electric.
-Digital position readout to repeat the position of left/right side rollers.
-Safety and emergency stop
-Machine in perfect condition of work

Capacity
Plate on edge 70 x 10 mm
Plate on flat 100x10 mm
Iron full bar 38 mm
Pipe 60x3 mm
Angle 60 mm
Tee 60 mm
C channel 80x45 mm
Tubular square 50 x 3 mm
Rectangle tubular 70x20 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2014
Offers online 21
Last activity Nov. 7, 2024

Description

-Profile bending roll- shafts output 60 mm
-brand MG Italy
-model AR60
-year 2001
-machine reversible can work with vertical shafts/horizontal shafts
-electric power 5,5 Hp on the hydraulic centralized unit
-voltage 380 /50

-output shafts 60 mm
-rollers diameter 215 mm
-rollers interchangeable in 3 pieces each shaft, adjustable for the different shape of profiles
-Powered driven the 3 shafts dragging with hydraulic motor and planetary gear-unit
-Dual rolling speed fast/slow
-Pinch pyramid configuration each shaft individual move hydraulic.
-Fully hydraulic side correctors / straighteners left and right side with double contrast rollers.
-Control panel movable on wheels, centralized commands electric.
-Digital position readout to repeat the position of left/right side rollers.
-Safety and emergency stop
-Machine in perfect condition of work

Capacity
Plate on edge 70 x 10 mm
Plate on flat 100x10 mm
Iron full bar 38 mm
Pipe 60x3 mm
Angle 60 mm
Tee 60 mm
C channel 80x45 mm
Tubular square 50 x 3 mm
Rectangle tubular 70x20 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Nbr of rolls 3
Shaft diameter 60 mm
Type Horizontal
CNC no
CNC type
Bending speed 6 m/min
-------------------
Weight 1000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2014
Offers online 21
Last activity Nov. 7, 2024

Here is a selection of similar machines

profile bending roll - angle 60mm