Specifications

X-axis travel 900 mm
Y-axis travel 2000 mm
Z-axis travel 800 mm
Accuracy 0.0017 mm
Table load capacity 1800 kg
Type of measurement dimensional
-------------------
Length x width x height 3220.0 × 1670.0 × 3130.0
Weight 4082 kg
Worked hours 500 hours
Hours under power 500 hours
State like new
At local norms ---------
Status under power

Description

Model: CRYSTA-Apex V9208
Manufactured: 03.2020

This 3-axis Mitutoyo CRYSTA-Apex V9208 was manufactured by Mitutoyo in Japan in March 2020 and delivered to our factory in Germany in May 2021. It features a measuring range of X: 900mm, Y: 2000mm, Z: 800mm, and utilizes air bearings on each axis for smooth operation. Ideal for precise measurements, the Mitutoyo CRYSTA-Apex V9208 machine we have for sale is a robust addition to any quality control process. Contact us for more information.

We used this machine in quality control of tooling for Airbus aircrafts. The machine is in very good working condition, quite new, was used few hours every month in controlling the tooling that we delivered to Airbus.

The buyer is responsible for disassembly and preparation for shipping; we only cover the necessary logistical support, such as a forklift. At request we can also recommend a transport company that can disassemble and do the transport of this machine to your factory.

If required we can also provide you with an offer for air compressor and air filtering units that we used with this machine.

Description
The latest generation CRYSTA-Apex coordinate measuring machines, the new CRYSTA-Apex V Series, is packed with state of the art technology, necessary for performing very accurate measurements at high speed. All new, using Mitutoyo’s world-renowned ABS scales, the CRYSTA-Apex V series has a high resistance to environmental conditions and does not require to perform homing upon start-up. SMS capability enables status and service monitoring, ready for use in a Smart Factory environment.

A future proof investment, the CRYSTA-Apex V is capable of tackling any task you might have in the future thanks to its ability to change or add probe systems and software with ease.

Main benefits:
 Proven lightweight bridge-type construction with high rigidity air-bearings on every axis
 High accuracy, high speed and high acceleration
 Temperature sensors for compensation of machine and workpiece from 16° to 26°C and monitoring of the environmental temperature.
 ABS linear scales provide high environmental resistance and saves time at start-up as homing is not necessary
 UC480 controller supporting Multi-sensor and SMS functionality (Smart Measuring System)

Features
Range: 900 x 2000 x 800 mm
Accuracy: E0, MPE from: (1,7+0,3L/100) µm
Width: 1,670 mm
Depth: 3220 mm
Height: 3,130 mm
Mass: 3,942 kg
E0,MPE: 1.7+0.4L/100
Max. drive speed: 519 mm/s (3-axis)
3D Acceleration: 2,309 mm/s2
Air supply: Pressure = 0,4 MPa
Loading
Weight: 1,800 kg
Loading
Height: 1,000 mm
Digital step: 0.1 µm

Standard stand

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2024
Offers online 2
Last activity Oct. 10, 2024

Description

Model: CRYSTA-Apex V9208
Manufactured: 03.2020

This 3-axis Mitutoyo CRYSTA-Apex V9208 was manufactured by Mitutoyo in Japan in March 2020 and delivered to our factory in Germany in May 2021. It features a measuring range of X: 900mm, Y: 2000mm, Z: 800mm, and utilizes air bearings on each axis for smooth operation. Ideal for precise measurements, the Mitutoyo CRYSTA-Apex V9208 machine we have for sale is a robust addition to any quality control process. Contact us for more information.

We used this machine in quality control of tooling for Airbus aircrafts. The machine is in very good working condition, quite new, was used few hours every month in controlling the tooling that we delivered to Airbus.

The buyer is responsible for disassembly and preparation for shipping; we only cover the necessary logistical support, such as a forklift. At request we can also recommend a transport company that can disassemble and do the transport of this machine to your factory.

If required we can also provide you with an offer for air compressor and air filtering units that we used with this machine.

Description
The latest generation CRYSTA-Apex coordinate measuring machines, the new CRYSTA-Apex V Series, is packed with state of the art technology, necessary for performing very accurate measurements at high speed. All new, using Mitutoyo’s world-renowned ABS scales, the CRYSTA-Apex V series has a high resistance to environmental conditions and does not require to perform homing upon start-up. SMS capability enables status and service monitoring, ready for use in a Smart Factory environment.

A future proof investment, the CRYSTA-Apex V is capable of tackling any task you might have in the future thanks to its ability to change or add probe systems and software with ease.

Main benefits:
 Proven lightweight bridge-type construction with high rigidity air-bearings on every axis
 High accuracy, high speed and high acceleration
 Temperature sensors for compensation of machine and workpiece from 16° to 26°C and monitoring of the environmental temperature.
 ABS linear scales provide high environmental resistance and saves time at start-up as homing is not necessary
 UC480 controller supporting Multi-sensor and SMS functionality (Smart Measuring System)

Features
Range: 900 x 2000 x 800 mm
Accuracy: E0, MPE from: (1,7+0,3L/100) µm
Width: 1,670 mm
Depth: 3220 mm
Height: 3,130 mm
Mass: 3,942 kg
E0,MPE: 1.7+0.4L/100
Max. drive speed: 519 mm/s (3-axis)
3D Acceleration: 2,309 mm/s2
Air supply: Pressure = 0,4 MPa
Loading
Weight: 1,800 kg
Loading
Height: 1,000 mm
Digital step: 0.1 µm

Standard stand

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

X-axis travel 900 mm
Y-axis travel 2000 mm
Z-axis travel 800 mm
Accuracy 0.0017 mm
Table load capacity 1800 kg
Type of measurement dimensional
-------------------
Length x width x height 3220.0 × 1670.0 × 3130.0
Weight 4082 kg
Worked hours 500 hours
Hours under power 500 hours
State like new
At local norms ---------
Status under power

About this seller

Client type User – small or medium company
Active since 2024
Offers online 2
Last activity Oct. 10, 2024

Here is a selection of similar machines

Mitutoyo CRYSTA-Apex V9208 Coordinate Measure Machine