Categories
Start selling

Account

Log In
Create an account

Account

Log In
Create an account
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040
PRIESS U. HORSTMANN BMA-DLS-CNC P250615040

PRIESS U. HORSTMANN BMA-DLS-CNC Woodworking machine Verified seller

Price on request

Make an offer
manufacturer PRIESS U. HORSTMANN
model BMA-DLS-CNC
year 2000
location Germany DE
category Miscellaneous wood machinery
product id P250615040
language
bg Дървообработваща машина PRIESS U. HORSTMANN BMA-DLS-CNC
cs Stroj na zpracování dřeva PRIESS U. HORSTMANN BMA-DLS-CNC
da PRIESS U. HORSTMANN BMA-DLS-CNC Træbearbejdningsmaskine
de PRIESS U. HORSTMANN BMA-DLS-CNC Holzbearbeitungsmaschine
el Ξυλουργική μηχανή PRIESS U. HORSTMANN BMA-DLS-CNC
en PRIESS U. HORSTMANN BMA-DLS-CNC Woodworking machine
es Máquina de carpintería PRIESS U. HORSTMANN BMA-DLS-CNC
fr Machine à bois PRIESS U. HORSTMANN BMA-DLS-CNC
hr Stroj za obradu drveta PRIESS U. HORSTMANN BMA-DLS-CNC
hu PRIESS U. HORSTMANN BMA-DLS-CNC Famegmunkáló gép
it Macchinario per il legno PRIESS U. HORSTMANN BMA-DLS-CNC
lt Medžio apdirbimo staklės PRIESS U. HORSTMANN BMA-DLS-CNC
nl PRIESS U. HORSTMANN BMA-DLS-CNC Houtbewerkingsmachine
pl Maszyna do drewna PRIESS U. HORSTMANN BMA-DLS-CNC
pt Máquina para trabalhar madeira PRIESS U. HORSTMANN BMA-DLS-CNC
ro Mașină de prelucrat lemnul PRIESS U. HORSTMANN BMA-DLS-CNC
ru PRIESS U. HORSTMANN BMA-DLS-CNC Деревообрабатывающий станок
sr Mašina za obradu drveta PRIESS U. HORSTMANN BMA-DLS-CNC
sv PRIESS U. HORSTMANN BMA-DLS-CNC Träbearbetningsmaskin
tr Ağaç işleme makinesi PRIESS U. HORSTMANN BMA-DLS-CNC

Specifications

-------------------
worked hours
hours under power
state as-is, where-is
At local norms ---------
status

Description

drilling and assembly line
Brand: Priess u. Horstmann
type: BMA-DLS-CNC
not rebuilt- without warranty

Year of construction: 2000


BMA-DLS-CNC drilling and assembly system
for the commission-based production of sides. Drilling for construction holes, running rails, shelf supports, connecting fittings, mounting plates, etc. The fittings can also be pressed in automatically. Feeding via magazine or vibratory conveyor (see below).

The basic machine consists of a solid, torsion-resistant frame with precision guides to accommodate the units. Control cabinet for the machine control (electro-pneumatic control) can be installed separately (see A-plan).

Electrical connection:
400V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), approx.18 KW. In accordance with VDE0100-T482, the system must be protected on site by an RCD. on site.

Service unit:
R 1/2” with pressure switch and air accumulator, operating pressure 6-7 bar. Supply line min. 1” (arrangement see A-plan) Extraction: min. 32 m/sec air speed at the respective nozzles of the units (required negative pressure 2200 Pa., capacity 40m3/min).

Paint finish:
Machine and control cabinet pebble gray (AAL 7032)
Supports and protective grille fire red (AAL 3000)
Motors and extraction hoods matt black (RAL 9005)

Workpiece dimensions:
- Length: 2x250 mm 2x1100 mm/1x2500 mm
- Width: 130 mm 700 mm
- Thickness: 16 mm 19 mm
The ratio of part width to part length should not exceed 1:1. Parts that are narrower than 200 mm only run on one conveyor belt and must therefore be monitored during transportation, as perfect transportation is not always guaranteed. Shelves for beveled cabinets are manually inserted directly into the machine, A second longitudinal stop is installed for these parts at width 300. For the beveled the rear edge of the beveled shelves is placed against the stop, the transverse aligner remains at the maximum opening dimension. The smallest shelf width (X dimension) is 268 mm. The smallest carcase height is 298 mm.

Working height: 930+/-20 mm
Cycle times:
Entry and exit with alignment: approx. 6 sec.
per drilling cycle and approx. 200 mm travel approx. 2 sec.
approx. 3 sec. per press-fit cycle.

Servo positioning system:
Target and actual value output and display for the axes by the CNC control system. Positioning via ball screws with backlash-free nut and highly dynamic, digital three-phase servomotors with clocked 4-quadrant controllers. Travel speed: approx. 60 m/min (X-axis), approx. 50 m/min (Y-axis).

CNC screen control:
Convenient CNC screen control with TFT color monitor and dust-proof membrane keyboard, installed in a stand (see A-plan). Ferrocontrol control Industrial PC (FIPC). Practice-oriented and proven operating software with on-screen operator guidance for all input and control functions, with function keys whose meanings are explained in plain text on the screen. The workpieces are called up for production via a multi-digit drill code, which can be extended by variant programming, additional parameters, part dimensions stop and number of pieces. The stacking location data is passed on to to the upstream loader.
Program memory for the current main program and for 250 sub-programs. External PC (to be provided by the customer) as storage and programming location for the drilling data. Integrated, freely programmable control (FPS) to achieve optimum processes and maximum operating to achieve optimum processes and maximum operational reliability. Fault diagnosis via LEDs and plain text displays on the screen, special service routines for simple troubleshooting.

Machine equipment (B):
1.) 1 screen control unit with its own housing and separate control panel to be machine, including plug connector to the control cabinet, instead of Screen built into the control cabinet

2.) 1 interface for connecting the master computer (PC with WIN NT), incl. cable and their routing within the system (not in on-site cable ducts or similar).

3.) 1 serial interface (RS 232) for connecting a modem for remote maintenance. The modem is included in the scope of delivery; the customer must provide a TAE connection socket (direct dialing capability) on each machine PC. The modem can be taken over after the warranty period has expired (subject to a charge) be taken over.

4.) 1 Programming software, for IBM or compatible PCs (operating system WIN NT). Recommended configuration: Pentium with min. 32 MB main memory, hard disk 500 MB (access time<=18ms), serial interface (RS 232), floppy disk drive 3.5(1.44 MB), SVGA color screen (1024*768). The software is provided in advance on a 3.5” floppy disk during the programming training, Duplication is only permitted for internal use.

5.) 1 Special software for the master computer, for creating and editing article and work lists, structure similar to the description “Sanipa W07- 1385.DOC”, which is available to you. Special software on the machine control unit for transfer of the work list from the master computer.

6.) 1 automatic workpiece infeed and outfeed in longitudinal direction (from left to right) via right) via 4 lowerable toothed belts, speed adjustable via frequency converter adjustable from 50-100 m/min. Transport divided for two stations.

7.) 1 automatic alignment system in longitudinal (X3) and transverse direction (Y3+Y4) for left and right sides simultaneously. The reference edge is the front edge from the bottom or top. For short sides (up to approx. 1100 mm), the sides are fed in in pairs, long sides one after the other. The part length and width are automatically measured during clamping without any loss of time. This certain programmable cycles can be adapted to the actual workpiece sizes (compensation of tolerances).

Portal equipment 1:

8.) 1 drilling gantry, movable in the X-axis via a servo positioning system (X1), with precision guides for holding and adjusting the units in the Y-axis direction.

9.) 1 servo positioning system for the Y-axis (Y1-axis).

10.) 1 cross slide with precision guides for holding and adjusting the units in the Z direction with a servo positioning system (11-axis).

11.) 1 gearbox with 18 individually controllable spindles (n=6000 rpm). Direct drill holder, shank diameter 10mm. Arrangement of the gearbox in Y- direction for construction bores, rails, etc. Drive motor P= 2.2 kW (unit 1, spindle 11...28). 2 suction nozzles D= 80

12.) 2 gearboxes, each with 9 individually controllable spindles (n=7500 rpm). Direct drill holder, shank diameter 10mm. Arrangement of the gearbox in X-direction for row of holes, flap holder, etc. Drive motor P= 1.6 kW (unit 5, spindle 51...59). 1 suction nozzle 0=80

13.) 1 Adjustment of the two hole row units in relation to each other to 4 positions:
- Pos.1: A= mm (distance hole row hanger T330)
- Pos.2: A= mm (distance hole row US T45)
- Pos.3: mm (distance hole row US T55)
- Pos.4: A= 348 mm (distance base foot US T55)


14.) 1 suction collector for 4 suction hoses D=80 from the individual units and a central connection piece D=160mm. 1 potential-free contact for control of a shut-off damper in the on-site extraction system

Equipment gantry 2:

15.) 1 assembly gantry, movable in the X-axis via a servo positioning system (X2), with precision guides for holding and adjusting the units in the Y direction.

16.) 1 servo positioning system for the Y-axis (Y2).

17) 1 setting unit for mounting plates with journals positioned one behind the other, feed via a traveling magazine.

18.) 1 vibratory conveyor for mounting plates with feed magazine and automatic automatic refilling device for the traveling magazine. Vibratory conveyor with sound-insulating hood and hopper with pneumatic flap. The hopper is pulled out of the protective grille so that the mounting plates can be refilled from the front can be refilled by the operator. The vibratory conveyor is located on the right behind the outfeed conveyor.

19.) 1 glue bar on the support on the right, with material pressure regulator and 7 glue valves. Glue valves arranged in a grid (32 mm) (see UP1456 sheet), movable with the servo positioning systems (X2 and Y2).

20.) 1 glue specification for high-viscosity special glue (e.g. JOWACOLL 11480) in 30 I containers. Glue pump (ratio 10:1) with follower plate, filter and stopcocks. Set up behind the system in front of the protective grid.

21) 2 press-in units for base feet (rectangular design with 4 dowel pins BA6 4 / 6 4). The fittings can be rotated 180° in the press-fit unit. the press-in unit. Fittings are fed via 2 fixed magazines on the right behind the infeed conveyor. behind the infeed conveyor. Adjustment of the two units in relation to each other to 2 positions (348 and 248 mm) for shelf depths 55 and 45.

22.) 1 space preparation to accommodate 2 press-in units for shelf supports, incl. extension of the adjustment to 4 positions analogous to the perforated row drilling units.

23.) 1 grooving unit for rear wall grooves (2.2KW, approx. 7500 rpm) with toothed belt transmission. Tool dimensions: D=125, d=30, B=4.5 mm. Suction hood with connection piece D=100, potential-free contact for controlling an on-site shut-off damper.

24.) 1 drilling unit for center post drilling for floors (width >600), installed at the bottom of the machine table. machine table. After drilling and pressing in the base feet, the floor is the base feet is pushed into position by the longitudinal aligner X3 (2 drill holes D=8mm, T=12 at a distance of 16mm in the X direction).

Further equipment
25.) 1 infeed roller conveyor with round belt drive (under the portal loading), with three-phase geared motor and frequency converter v=60m/min at 50 Hz. Construction height 930+/-20 mm, usable width 700mm, rollers covered with plastic hose, roller pitch 100mm, length approx. 3,000mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2013
Offers online 74
Last activity July 9, 2025

Description

drilling and assembly line
Brand: Priess u. Horstmann
type: BMA-DLS-CNC
not rebuilt- without warranty

Year of construction: 2000


BMA-DLS-CNC drilling and assembly system
for the commission-based production of sides. Drilling for construction holes, running rails, shelf supports, connecting fittings, mounting plates, etc. The fittings can also be pressed in automatically. Feeding via magazine or vibratory conveyor (see below).

The basic machine consists of a solid, torsion-resistant frame with precision guides to accommodate the units. Control cabinet for the machine control (electro-pneumatic control) can be installed separately (see A-plan).

Electrical connection:
400V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), approx.18 KW. In accordance with VDE0100-T482, the system must be protected on site by an RCD. on site.

Service unit:
R 1/2” with pressure switch and air accumulator, operating pressure 6-7 bar. Supply line min. 1” (arrangement see A-plan) Extraction: min. 32 m/sec air speed at the respective nozzles of the units (required negative pressure 2200 Pa., capacity 40m3/min).

Paint finish:
Machine and control cabinet pebble gray (AAL 7032)
Supports and protective grille fire red (AAL 3000)
Motors and extraction hoods matt black (RAL 9005)

Workpiece dimensions:
- Length: 2x250 mm 2x1100 mm/1x2500 mm
- Width: 130 mm 700 mm
- Thickness: 16 mm 19 mm
The ratio of part width to part length should not exceed 1:1. Parts that are narrower than 200 mm only run on one conveyor belt and must therefore be monitored during transportation, as perfect transportation is not always guaranteed. Shelves for beveled cabinets are manually inserted directly into the machine, A second longitudinal stop is installed for these parts at width 300. For the beveled the rear edge of the beveled shelves is placed against the stop, the transverse aligner remains at the maximum opening dimension. The smallest shelf width (X dimension) is 268 mm. The smallest carcase height is 298 mm.

Working height: 930+/-20 mm
Cycle times:
Entry and exit with alignment: approx. 6 sec.
per drilling cycle and approx. 200 mm travel approx. 2 sec.
approx. 3 sec. per press-fit cycle.

Servo positioning system:
Target and actual value output and display for the axes by the CNC control system. Positioning via ball screws with backlash-free nut and highly dynamic, digital three-phase servomotors with clocked 4-quadrant controllers. Travel speed: approx. 60 m/min (X-axis), approx. 50 m/min (Y-axis).

CNC screen control:
Convenient CNC screen control with TFT color monitor and dust-proof membrane keyboard, installed in a stand (see A-plan). Ferrocontrol control Industrial PC (FIPC). Practice-oriented and proven operating software with on-screen operator guidance for all input and control functions, with function keys whose meanings are explained in plain text on the screen. The workpieces are called up for production via a multi-digit drill code, which can be extended by variant programming, additional parameters, part dimensions stop and number of pieces. The stacking location data is passed on to to the upstream loader.
Program memory for the current main program and for 250 sub-programs. External PC (to be provided by the customer) as storage and programming location for the drilling data. Integrated, freely programmable control (FPS) to achieve optimum processes and maximum operating to achieve optimum processes and maximum operational reliability. Fault diagnosis via LEDs and plain text displays on the screen, special service routines for simple troubleshooting.

Machine equipment (B):
1.) 1 screen control unit with its own housing and separate control panel to be machine, including plug connector to the control cabinet, instead of Screen built into the control cabinet

2.) 1 interface for connecting the master computer (PC with WIN NT), incl. cable and their routing within the system (not in on-site cable ducts or similar).

3.) 1 serial interface (RS 232) for connecting a modem for remote maintenance. The modem is included in the scope of delivery; the customer must provide a TAE connection socket (direct dialing capability) on each machine PC. The modem can be taken over after the warranty period has expired (subject to a charge) be taken over.

4.) 1 Programming software, for IBM or compatible PCs (operating system WIN NT). Recommended configuration: Pentium with min. 32 MB main memory, hard disk 500 MB (access time<=18ms), serial interface (RS 232), floppy disk drive 3.5(1.44 MB), SVGA color screen (1024*768). The software is provided in advance on a 3.5” floppy disk during the programming training, Duplication is only permitted for internal use.

5.) 1 Special software for the master computer, for creating and editing article and work lists, structure similar to the description “Sanipa W07- 1385.DOC”, which is available to you. Special software on the machine control unit for transfer of the work list from the master computer.

6.) 1 automatic workpiece infeed and outfeed in longitudinal direction (from left to right) via right) via 4 lowerable toothed belts, speed adjustable via frequency converter adjustable from 50-100 m/min. Transport divided for two stations.

7.) 1 automatic alignment system in longitudinal (X3) and transverse direction (Y3+Y4) for left and right sides simultaneously. The reference edge is the front edge from the bottom or top. For short sides (up to approx. 1100 mm), the sides are fed in in pairs, long sides one after the other. The part length and width are automatically measured during clamping without any loss of time. This certain programmable cycles can be adapted to the actual workpiece sizes (compensation of tolerances).

Portal equipment 1:

8.) 1 drilling gantry, movable in the X-axis via a servo positioning system (X1), with precision guides for holding and adjusting the units in the Y-axis direction.

9.) 1 servo positioning system for the Y-axis (Y1-axis).

10.) 1 cross slide with precision guides for holding and adjusting the units in the Z direction with a servo positioning system (11-axis).

11.) 1 gearbox with 18 individually controllable spindles (n=6000 rpm). Direct drill holder, shank diameter 10mm. Arrangement of the gearbox in Y- direction for construction bores, rails, etc. Drive motor P= 2.2 kW (unit 1, spindle 11...28). 2 suction nozzles D= 80

12.) 2 gearboxes, each with 9 individually controllable spindles (n=7500 rpm). Direct drill holder, shank diameter 10mm. Arrangement of the gearbox in X-direction for row of holes, flap holder, etc. Drive motor P= 1.6 kW (unit 5, spindle 51...59). 1 suction nozzle 0=80

13.) 1 Adjustment of the two hole row units in relation to each other to 4 positions:
- Pos.1: A= mm (distance hole row hanger T330)
- Pos.2: A= mm (distance hole row US T45)
- Pos.3: mm (distance hole row US T55)
- Pos.4: A= 348 mm (distance base foot US T55)


14.) 1 suction collector for 4 suction hoses D=80 from the individual units and a central connection piece D=160mm. 1 potential-free contact for control of a shut-off damper in the on-site extraction system

Equipment gantry 2:

15.) 1 assembly gantry, movable in the X-axis via a servo positioning system (X2), with precision guides for holding and adjusting the units in the Y direction.

16.) 1 servo positioning system for the Y-axis (Y2).

17) 1 setting unit for mounting plates with journals positioned one behind the other, feed via a traveling magazine.

18.) 1 vibratory conveyor for mounting plates with feed magazine and automatic automatic refilling device for the traveling magazine. Vibratory conveyor with sound-insulating hood and hopper with pneumatic flap. The hopper is pulled out of the protective grille so that the mounting plates can be refilled from the front can be refilled by the operator. The vibratory conveyor is located on the right behind the outfeed conveyor.

19.) 1 glue bar on the support on the right, with material pressure regulator and 7 glue valves. Glue valves arranged in a grid (32 mm) (see UP1456 sheet), movable with the servo positioning systems (X2 and Y2).

20.) 1 glue specification for high-viscosity special glue (e.g. JOWACOLL 11480) in 30 I containers. Glue pump (ratio 10:1) with follower plate, filter and stopcocks. Set up behind the system in front of the protective grid.

21) 2 press-in units for base feet (rectangular design with 4 dowel pins BA6 4 / 6 4). The fittings can be rotated 180° in the press-fit unit. the press-in unit. Fittings are fed via 2 fixed magazines on the right behind the infeed conveyor. behind the infeed conveyor. Adjustment of the two units in relation to each other to 2 positions (348 and 248 mm) for shelf depths 55 and 45.

22.) 1 space preparation to accommodate 2 press-in units for shelf supports, incl. extension of the adjustment to 4 positions analogous to the perforated row drilling units.

23.) 1 grooving unit for rear wall grooves (2.2KW, approx. 7500 rpm) with toothed belt transmission. Tool dimensions: D=125, d=30, B=4.5 mm. Suction hood with connection piece D=100, potential-free contact for controlling an on-site shut-off damper.

24.) 1 drilling unit for center post drilling for floors (width >600), installed at the bottom of the machine table. machine table. After drilling and pressing in the base feet, the floor is the base feet is pushed into position by the longitudinal aligner X3 (2 drill holes D=8mm, T=12 at a distance of 16mm in the X direction).

Further equipment
25.) 1 infeed roller conveyor with round belt drive (under the portal loading), with three-phase geared motor and frequency converter v=60m/min at 50 Hz. Construction height 930+/-20 mm, usable width 700mm, rollers covered with plastic hose, roller pitch 100mm, length approx. 3,000mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Specifications

-------------------
worked hours
hours under power
state as-is, where-is
At local norms ---------
status

About this seller

Client type Reseller
Active since 2013
Offers online 74
Last activity July 9, 2025

Here is a selection of similar machines

See all alternatives

Loading similar machines...

Categories

Menu Categories search

Menu

Start selling

PRIESS U. HORSTMANN BMA-DLS-CNC Woodworking machine