PROTECH SABBIATRICE SERVOCOMANDATA MOD. SC220 Spray booth

Description

SANDBLASTING CHAMBER
Consisting of :
SANDBLASTING CHAMBER having the useful internal dimensions of :
Length : 19.0 mt.
Width : 6.0 mt.
Height : 5.5 mt.
-N. 3 SOUNDPROOFED AIR VENTS located on the roof of the blasting chamber.
-DRY DUST FACTOR of the cartridge type, with automatic cleaning of the
cartridges by jets of compressed air
Flow rate : 33,000 mc/h
Power : 40 HP
Filter surface area : 504 sq.m.
(No. 24 of 21 sq.m./cad.)
Filter media : Cartridge h=1000
polyester
Emission : Less than 3Mmgr/N mc.
-Mt. 17 dust suction ducts complete with no. 2 dust collection nozzles.
-Mt. 8 filtered air exhaust chimney complete with sleeve for verification of emissions into the
atmosphere
FULLY AUTOMATIC TOTAL ABRASIVE RECOVERY SYSTEM
Composed of:
-n. 4 longitudinal scrapers with fixed the appropriate rubber strips equipped with reciprocating and oscillatory movement driven by gearmotor units from the total power of HP 8. In the forward stroke the rubber strips, bring the abrasive to the transverse scraper located in the center of the blasting chamber. In the return stroke the movements are reversed, the rubber strips meeting the grit, rise as they are free to oscillate. Also present is.
-N. 1 TRANSVERSAL SCRAPER of similar characteristics to those described above.
-PANELS IN GRID COVERING RASKERS composed of 40-mm plates and 30/10-thick perforated sheet metal.
- Mt. 20 OF BINARY composed of a round section profile supported by a structure made of
Cement
- CUP ELEVATOR particularly suitable for lifting the abrasive
- PNEUMATIC SELECTOR so as to separate the abrasive from the slag contained in the same by means of a rotating sieve HP 0.25
- No. 1 ABRASIVE COLLECTION SILO consisting of:
- n.2 visual level indicators
- no.2 discharge outlets complete with damper of
manual adjustment for the feeding of no.2
sandblasting machines
- n.1 ladder with protection to standards
- no.1 inspection hatch
- no.1 elevator-selector head access platform