Daewoo DMV-400

Year: 1998

Specification PALLET SIZE (2 PALLET MACHINE) 17.7" x 25.6" MAXIMUM PALLET LOAD 660 LBS SPINDLE NOSE TO PALLET TOP 5.9" - 28.3" X AXIS TRAVEL 22.0" Y AXIS TRAVEL 15.7" Z AXIS TRAVEL 22.4" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0.04 - 315 IPM SPINDLE MOTOR 15 HP TOOL CHANGER CAPACITY 30 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.5 SECONDS MAXIMUM TOOL WEIGHT 17.6 LBS …

Year: 1999

Travel: X-Axis 22.0" Y-Axis 15.7" Z-Axis 22.4" Spindle Nose to Table Top 5.9" - 28.3" Spindle Motor 15 / 10 HP Tools 30 Table Load Capacity 660 lbs. Rapid Traverse Rates (X & Y / Z) 1181 / 945 IPM Max Tool Diameter 3.5" Max Tool Length 11.8" Max Tool Weight 17.6 lbs. FEATURES: MITSUBISHI MELDAS 520 CNC CONTROL 9" Monochrome CRT Auto Two Pallet Changer (Rotary Type) 30 Position Side Mount Tool Changer Coolant Thru Spindle Rigid Tapping Remote …

Year: 1999

EQUIPPED WITH: Remote Handwheel, Automatic Rotary Style Work Changer with (2) 17.7" x 25.5" Work Areas, Thru the Spindle Coolant, 30 Station Automatic Tool Changer, Spindle Oil Cooler, Full Coolant Enclosure, Magnetic Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Work Area............................................. 17.7" x 25.5" Workpiece Change Setup................................ 0/180 Deg. Table Load Capacity................................... 660 LBS Table Top to Spindle Nose Minimum..................... 5.9" Table Top to Spindle Nose Maximum..................... 28.3" Rapid Traverse Rate All Axes.......................... 1181 IPM Tool Storage Capacity................................. 30 Spindle Horsepower.................................... …

Year: 1998

Specifications Travel: X-Axis 22.0" Y-Axis 15.7" Z-Axis 22.4" Spindle Nose to Table Top 5.9" - 28.3" Spindle Motor 15 / 10 HP Tools 30 Table Load Capacity 660 lbs. Rapid Traverse Rates (X & Y / Z) 1181 / 945 IPM Max Tool Diameter 3.5" Max Tool Length 11.8" Max Tool Weight 17.6 lbs. FEATURES: MITSUBISHI MELDAS 520M CNC CONTROL 9" Monochrome CRT Auto Two Pallet Changer (Spin Type) 30 Position Side Mount Tool Changer Coolant Thru Spindle (175 psi) …

Year: 2000

(1) Used Daewoo Model DMV-400 CNC Vertical Machining Center, Pallet Shuttle Type, New 2000 Specifications: Spindle Face to Pallet 5.9" - 28.3" Spindle Center to Column 18.9" Machine Travels (X/Y/Z) 22" / 15.7" / 22.4" Number of Pallets 2 Pallet Change Style 180 Degree Index Pallet Size (2) 25.6" x 17.7" Spindle Taper Cat 40 Taper Spindle Speeds 10,000 RPM Spindle Drive 15 HP Rapid Traverse (X/Y/Z) 1181 / 1181 / 945 ipm Pallet Change Time 5 sec Toolchanger Style …