Manufacturer | Deckel |
---|---|
Model | S1 |
Category | Grinding machines - miscellaneous (crankshaft, sharpening, tool grinders ...) |
Max. wheel speed | 10000 u/mn |
Spindle power | 2 kW |
------------------- | |
Length x width x height | 1000.0 × 600.0 × 1400.0 |
Weight | 500 kg |
Year:
Price on request
Switzerland
Year: 1997
Description: Suitable to manually grind different kinds of cutting, drilling tools and milling cutters. Specifications: Max. tool dia. between the centres 238 mm, grinding stroke 190 mm, tools slide traverse travel 100 mm, grinding head vertical travel 325 mm, grinding spindle longitudinal feed 5 mm, grinding head bracket swivel 360°, grinding head swivel 360°, tool slide carrier 360°, max. grinding wheel dia. 200 x 20 mm, stepless grinding spindle speed 2000 - 10000 rpm, connected load 2 kW (400 volts …Price on request
Germany
Year: 1987
Universal grinding machine for sharpening cutting tools (drills, burs, etc.). Manufacturer: Deckel Model: S11 Visible under powerPrice on request
France
Year:
Manual type transversal travel 200mm longitudinal travel 260mm vertical travel 50mm max diam 130mm Dist. betw. centers 250mm 3700-7500rpm max grinding length 260mm power 1hpPrice on request
Italy
Year: 1992
Specifications Tool slide clamping surface (table) 7" x 20" Work table longitudinal travel 7.5" Work table cross travel 4" Grinding spindle vertical travel 12.8" Spindle axial feed 0.2" Maximum tool diameter between centers with 13.3" universal index head and tailstock with adapter bracket on tool slide Maximum tool length between centers with tailstocks 37" and adapter bracket on tool slide Swivel angle of grinding head bracket, grinding 360 degrees head, and tool slide carrier (table) Universal Index Head swivel, horizontal …Price on request
USA
Year:
Centre height 95 mm Distance between centres 250 mm Table length 450 mm Table width 175 mm Max. grinding diameter 130 mm Longitudinal way of table 260 mm Transversal way of the table 50 mm Vertical adjustment of the table 50 mm Table swivels 360 ° Slewing range of grinding head: horizontal 360 ° vertical 220 ° Grinding spindle speeds: number (steps) 2 from 3750 rpm up to 7500 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor 0.50 …Price on request
Switzerland
Year: 1984
Driving engine power : 0,4/0,5 [kW] - Driving engine speed (2 polarities) : 1400-2800 [rpm] - 2 grinding wheel holder spindle speeds : 3750-7500 [rpm] Nhzvlmkb - Max. sharpening between centers diameter : 130 [mm] - Max. sharpening between centers length : 250 [mm] - Max. sharpening in the air diameter : 320 [mm] - Internal cone of the rotary table spindle : Morse 4 - Max. boring of tightening collets : 25 [mm] - Longitudinal adjustment of the table …Price on request
Israel
Year: 1991
Universal tool grinding machine cover S11. With accessories as seen. Bauj.1991 invested 1 year 9000 €Price on request
Germany
Year:
Price on request
Switzerland
Year: 1992
ADJUSTABLE THROUGH 360 DEG. IN 5 AXES MACHINE COMES WITH MANY ACCESSORIES WORTABLE LONGITUDINAL TRAVEL .................. 7.5" WORKTABLE CROSS TRAVEL ........................ 4" SPINDLE, VERTICAL TRAVEL ...................... 13" SPINDLE AXIAL FEED ............................ 0.187" MAX. WORKPIECE DIA. BETWEEN CENTERS ........... 13.5" MAX. WORKPIECE LENGTH BETWEEN CENTERS ......... 37" SPINDLE COLUMN SWIVEL, HORIZONTAL ............. 360 DEG. SPINDLE COLUMN SWIVEL, VERTICAL ............... 360 DEG. WORKTABLE SWIVEL .............................. 360 DEG. UNIVERSAL INDEX HEAD SWIVE, HORIZONTAL ........ 360 DEG. UNIVERSAL INDEX HEAD SWIVEL, VERTICAL ......... 360 …Price on request
USA
Year:
Grinding Machines Three-jaw chuck: SK 40 Radius grinding device Grinding wheel holders Additional grinding spindle Accessories: Collet set Dividing wheels Dividing head and othersPrice on request
Germany
Year: 1971
Max. grinding dia.: 130-320 mm Workpiece length: 250 mm Longitudinal travel: 260 mm Cross travel: 200 mm Power capicity of grinding motor: 0,55-0,75 kW Spindle turning speed range (power take off): 3750-7500 U/min Total power: 2,2 kWPrice on request
Lithuania
Year:
Max. tool diameter betw. centre: 130 mm Max. tool length: 250 mm Cone of dividing head: CM4 mm X/Y/Z: 260/200-50/50 mm Operation: Manual Accessories: Some dividing platesPrice on request
Austria
Year: 1986
Price on request
Germany
Year:
Technical characteristics: - Clamping surface of the tool carriage table: 500 x 180 [mm], - Max tool Ø between centers with tailstock on tool carriage 238 [mm], 338 [mm] (with intermediate support or universal divider), - maximum Ø of the tool mounted in overhang in universal divider: 620 [mm], - Maximum tool length between centers with tailstock on tool carriage 380 [mm], 940 [mm] (with intermediate support), 530 [mm] (universal divider and intermediate support). Races: - Sharpening length 190 [mm] …Price on request
France
Year: 1977
Suitable for grinding spiral tool. Equipped with dividing head, a universal device for adjusting, Center height dividing heads - 95 mm The largest diameter between centers - 130 mm Largest distance between the centers - 250 mm The largest diameter in the chuck - 320 mm The inner cone of the spindle dividing head-Morse 4, or a standard 40 The greatest length of the spiral grinding - 100 mm The smallest and largest spiral course of 10-6800 mm Turnover Grinding …Price on request
Russia
Year:
affuteuse deckel s11 with all the tools Paris Press brake, shearing machine, bending machine, bending machine, Machining center, generator, digital lathe, Conventional lathe, vertical lathe, boring machine, milling machine, Fixed bench milling machine, digital milling, laser cutting, plasma cutting, Machining centers, grinding machines, machine tools, sheet metal machines, Wood and aluminum machinery ...Price on request
France
Year:
Universal sharpening machine DECKEL S11 Technical characteristics: - Clamping surface of the tool carriage table: 500 x 180 [mm], - max tool Ø between centers with tailstock on tool carriage 238 [mm], 338 [mm] (with intermediate support or universal divider), - max Ø of the tool mounted overhanging in the universal divider: 620 [mm], - Maximum tool length between centers with tailstock on tool carriage 380 [mm], 940 [mm] (with intermediate support), 530 [mm] (universal divider and intermediate support). RACES: …Price on request
France
Year:
Deckel S1 Machine Data Manufacturer Deckel Machine type S1 Condition Used Functionality Tested and fully functional this extra information is standard for this model. Please always double-check the details during a visit The Deckel S1 cylindrical centerless grinding machine, manufactured by Deckel, is renowned for its precision and reliability in metalworking operations. Despite being a used model, this machine has been meticulously tested and verified to be fully functional, ensuring optimal performance in various grinding applications. The Deckel S1 offers …Price on request
Germany
Year: 1985
grinding diameter - max.238-620 mm grinding length 190 mm workpiece length 380-940 mm power 380 kVA drive power - grinding motor 1.1 kW grinding spindle speeds 2-10,000 rpm total power requirement 2.2 kW Watering device Cabinet Various tools. Weight: 520 Kg Very good statePrice on request
Switzerland