Manufacturer | Haco |
---|---|
Model | TS 3012 |
Category | Shears - hydraulic guillotines |
Cutting length | 3050 mm |
Max. thickness | 12 mm |
Max cutting angle | 3 ° |
Min cutting angle | 5 ° |
Back gauge type | |
Backgauge adjustment | 1000 mm |
Sheet support | |
------------------- | |
Length x width x height | 3600.0 × 2030.0 × 2030.0 |
Weight | 8500 kg |
Year:
Price on request
France
Year:
Price on request
France
Year: 2008
SP8 Robosoft Sheet thickness (mm) 12 mm Sheet width (mm) 3100 mm Depth rear gauge (mm) 750 / 1000Price on request
Netherlands
Year:
Cutting lenght : 3 050 mm Cutting thickness : 12 mm Number of hold downs : 18 Back gauge : Electric Stroke of the backgauge : 1000 mm Tension : 380 V, 50 Hz Variable cutting angle Blade gap adjustable Pedal foot controllerPrice on request
France
Year: 1995
Capacity 3M X 12MM Back gauge POWER Rapid blade adjustment YES Variable rake YES Work supports 2 @ 900MM Squaring arms 1 @ 1000MM Input 415/3/50 AC 11 KW Clamps 18 X HYDRAULIC Read-out to back gauge METRIC Actuated via WANDER TYPE FOOT SWITCH Fitted with FINGERGUARD Length 13'4" (4.06M) Width 6'8" (2.03M) Height 7'4" (2.23M) Nett weight actual 8600 KGSPrice on request
United Kingdom
Year: 2005
SPECIFICATIONS Type guillotine cutter < CNC SP8 Shearing length 3050 mm Shearing Steel thickness (45kg / mm²) 12 mm Cutting angle from 0.5 to 3 ° Cadence 7-14 cps / min Motorized rear stop Thin sheet metal support Yes Evacuateur tole Yes Arm length 1000 mm equerre Main motor power 22,5 Kw 380V electrical Alimentatione year 2005 EQUIPMENT Manual adjustment of the clearance between blade DATA OF THE MACHINE Dimensions (L x W x H) 4220 x 2800 x 2210 …Price on request
France
Year: 2008
Capacity: 3050 x 12 mm SP8 NC control Backgauge numerically adjustable Light shield at the back original manualPrice on request
Netherlands
Year: 1988
Type guillotine cutter < Shearing length 3100 mm Shearing Steel thickness (45kg / mm²) 12 mm Motorized rear stop Backstop 1000 mm Capacity Support tole fine not Evacuateur not tole 380V electrical Alimentatione year 1988 EQUIPMENT Manual adjustment of the clearance between blade DATA OF THE MACHINEPrice on request
France
Year:
Haco hydraulic shear model TS 3012 3 meters x 12 motorized bumper mm and angle variable cut vertical. cutting length: 3,050 mm. which maximum of cutting: 12 mm. thickness of cutting in stainless : 8 mm. cutting variable. adjustable angle 0, 5-3 ° angle stop motorized. adjust fine manual milimetrico. number of blows per minute: 7-14. 1 8 clamps. regulations CE in perfect condition.Price on request
Spain
Year: 1996
SPECIFICATIONS ControllElectric backstop Guillotine / Lazer / Cutting tableGuillotine Cutting lenght3050 mm Maximum sheet thickness12 mm Backgauge stroke X in mm1000 mm DIMENSIONS Length3800 mm Width 1850 mm Height 2030 mmPrice on request
Netherlands
Year:
Welded steel frame of the monobloc type Electro-hydraulic control from the control cabinet located at the front of the machine by grouping all functions 2 blades with 4 new cutting edges Quick manual adjustment of the clearance between the blades on the back of the machine Lighting of the cutting line 2 m squaring stop with recessed slide, T-slot and retractable ratchet 16 handling balls Foot switch Adjusting the cutting angle with display 1-2-3 Greenhouse with swivel pads Retractable motor …Price on request
France
Year:
(conventional) but with an electric backgauge with positioner sp 8 Machine revised, to CE safety standards and with new blades 4 sharp. New model. Machine new colors blue and gray.Price on request
France
Year:
with electric backgauge with end display by Siko counter revised machine, to EC safety standards and with 4 sharp blades. We reserve the right to repaint the machine in the new colors Blue and Gray. The photo shows it in light yellowish gray.Price on request
France
Year:
Hydraulic unit with pump motor located at the rear of the machine, therefore easily accessible 2 jacks at the bottom. Cutting angles adjustable by electro-hydraulic control All functions are grouped together on the left side of the machine The SP9 control offers you the following functions: automatic positioning of the back gauge with digital display, adjustment of the cutting length and selection of the back gauge retraction. Manual and quick adjustment of the clearance between blades by lever at the …Price on request
France
Year: 1986
Haco TS 3012Price on request
Sweden
Year: 1989
Price on request
France
Year: 1986
Shearing length 3050 mm Max. thickness 12 mm Hydraulic Equipped with: Motorized backgaugePrice on request
Denmark
Year: 2010
sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 pcs cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1.000 mm Control: SP 9 total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Hydraulic, link-guided guillotine shears - HACO NC machine control SP 9 * Preselection positioning from the backgauge …Price on request
Germany
Year: 1991
Specifications: Max. length of plate 3050 mm Max. plate thickness 12 mm Equipped with: Motorized back gauge Angle plate Adjustment of blade gap clearance Adjustable cutting angle Foot contact Service tools etc.Price on request
Denmark
Year: 2016
HACO plate shears TS 3012 Sheet width: 3050 mm sheet thickness: 12,0 mm Cutting angle: 0,5-3,0°. Reach of the backgauge: 1000 mm SP9 control with automatic positioning of the backgauge in the selected position on the digital display, stroke counter and retraction function for the backgauge, as well as limitation of the cutting length and piece counter. Year of manufacture: 2016 Still in very good conditionPrice on request
Belgium
Year: ~ 2007
Thickness 12 mm Maximum length 3050 mm Backgauge capacity 1000 mm Cutting angle 0.5 ° to 3 °Price on request
France
Year: 1987
Maximum sheet thickness 12 mm Max. cutting length 3100 mm Strokes on full length 17 mm Strokes in short 1000 length 21 Cutting angle 0,5 - 3 ° Length backgauge 0 - 1000 mm Number off down holders 18 Approach speed 50 mm/sec. Power 15 kWPrice on request
Netherlands
Year: 2007
The Machine Model TS Type 3012 Year of construction 2007 Capacity 12 mm Maximum working pressure 260 bar Working length 3000 mm Stroke of the back gauge 1000 mm Technical data Power of the main motor 22 kW Weight 8,9 t Type of control unit SP8Price on request
Latvia
Year: 1993
Capacity: 3050 x 12 mm Electric back gauge Electric cutting angle adjustment Electric cutting height adjustment foot pedalPrice on request
Netherlands
Year: 1984
hydraulic shear Manufacturer: Haco Model: TS3012 Year of manufacture: 1984 Cutting length: 3050 mm Cutting thickness: 12 mm motorized back gauge,Price on request
Spain
Year: 2004
This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm. Machine width: 4200 mm Machine depth: 2100 mm Machine height: 2400 mm Machine weight: 8900 kg CNC: HACO SP 8 Spindle motor power: 22.5 kW Main electronic connection: 380V / 50 Hz Max cutting length: 3000 mm Back gauge stroke: 1000 mm Max cutting thickness: 12 mm …Price on request
Poland