Hurco BMC-20

Table Size: 13-3/4" x 30" with (3) .710" T-Slots on 3.94" Centers Travels: 24" X - 14" Y - 16" Z Distance Spindle to Table: 3.7" Min. to 19.7" Max. Center of Spindle Back to Frame: 16" Max. Table Load: 550 Lbs. Feeds: .1 to 150 IPM Rapid Traverse Rate: 400 IPM Spindle Speeds: 60 to 6000 RPM Spindle Taper: CAT40 16-Position Automatic Tool Changer, Bi Directional, Random Selection Max. Tool Diameter in Adjacent Stations: 3.2" Max. Tool Diameter in Non Adjacent Stations: 6" Max. Tool Length: 10" Max. Tool Weight: 15 Lbs. Hard Box Ways Auto Lube System Ultimax III 3-Axis Conversational Control with Graphics, Conversational & G Code Programming 3-1/2" Disk Drive, RS232 Port Total On Hours: 15,613 Assorted Cat 40 Tool Holders Flood Coolant & Spray Mist Halogen Work Light Spindle Drive Motor: 7-1/2 HP Continuous, 10 HP 30-Minutes Wired 3 Phase, 60 Cycle, 220-440 Volts Overall Dimensions: 84" L-R x 113" F-B x 92" H (101" H Sitting on Skid) Machine Weight: 7,250 Lbs.