Machine's specifications - Nakamura TW-20MM Used machines

Manufacturer	Nakamura
Model	TW-20MM
Category	Lathes - cnc lathes

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1997

Max. Turning Diameter ............. 10.63" Max. Turning Length ............... 7.56" Bar Capacity Left & Right ......... 2" Spindle Nose ...................... a2-6 Spindle Speeds Max. ............... 5000 Rpm Spindle Drive Motors .............. 20Hp Rotary Tool Speed Max. ............ 3600 Rpm NOTES Machine is in Italy 6654 CNC lathe: NAKAMURA TOME Mod: TW-20M S/N: W24004 For bars Diameter max. collet: mm. 65 With subspindle 3 jaw Diameter: mm. 160 Turret tool-holders for collets for 12 tools, complete of tool-holders normal and live …

Price on request

USA

NAKAMURA TW-20 MMY Cnc lathe Sold

Year: 2008

Chuck diameter:210 mm Max. bar diameter:51 mm X-travel:X1: 195 mm X2: 195 mm Z-travel:Z1:265 mm Z2:780 mm Y-travel:Y1: +/- 45 mm Y2:+/-45 mm Spindle motor power:15/11 kW (both) Spindles speed:5000 rpm (both) Turrets:2 Stations turret: 24 (both) Rotary tools speed:3600 rpm Rotary tools motor power:3.7/2.2 kW C-axis:Yes Weight of the machine:8,800 Kg Cutting hours:3004 Additional information:GR-210 gantry loader, parts catcher, swarf conveyor, ACS 1000 air clean filter

Price on request

Spain

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1990

SPECIFICATIONS Machine Dimensions 144"x79"x78" Machine Weight lbs. Maximum Bar Capacity 2.52" Maximum Turning Diameter 11.02" Maximum Turning Length 11.81" Rapid Traverse X / Z 472 IPM / 945 IPM Rotary Tool Motor 5 HP Rotary Tool Speeds 180 - 3,600 RPM Spindle Motor 30 Min. / Cont. 25 HP / 20 HP Spindle Nose / Spindle Bore A1-8" / 3.15" Spindle Speed 35 - 3,500 RPM Turret Type (All Live) (2) 12 Pos. Turrets X-Axis Travel (Both) 9.06" Z-Axis Travel …

Price on request

USA

Used Nakamura TW-20MM Cnc lathe with FANUC 16-TT CNC CONTROL Sold

Year: 1996

SPECIFICATIONS: MAX. TURNING DIAMETER ............. 10.63" MAX. TURNING LENGTH ............... 7.56" BAR CAPACITY LEFT & RIGHT ......... 2" SPINDLE NOSE ...................... A2-6 SPINDLE SPEEDS MAX. ............... 5000 RPM SPINDLE DRIVE MOTORS .............. 20HP ROTARY TOOL SPEED MAX. ............ 3600 RPM NOTES EQUIPPED WITH: - FANUC 16-TT CNC CONTROL - (2) 8" 3-JAW HYD. CHUCKS - (2) 12 STATION TURRETS - (6)ROTARY TOOLHOLDERS - PARTS CATCHER - CHIP CONVEYOR - LNS QUICKLOAD SERVO MAGAZINE BARFEED

Price on request

USA

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1997

Swing Over Bed...........................10.6 In Max Turning Diameter.....................10.6 In Max. Turning Length..................... 7.6 In Spindle Nose.............................A2-6 Spindle Bore.............................2.5 In Spindle Speeds...........................50 - 5000 RPM Total No. of Tools.......................24(12 x 2) Effective Slide Travel Left Unit X-Axis..............................7.7 In Z-Axis..............................10.4 In Effective Slide Travel Right Unit X-Axis .............................7.7 In Z-Axis..............................30.7 In Rapid Traverse: X - Axes............................472 IPM Z - Axes............................945 IPM Live Tool Speed..........................45 - 3600 RPM EQUIPPED WITH Fanuc 0-TTA Control Barfeed 3 LIVE TOOLS INCLUDED Many Misc. Holders (ID/OD) Full C …

Price on request

USA

Used Nakamura, Model TW-20mm. Cnc lathe Sold

Year: 2003

Specifications Chuck Size (2) 16C Clts. Maximum Swing over Covers/over Saddle 10.63" / 8.46" Distance Btwn. Spindle Nose and Turret 4.33" - 14.76" Maximum Bar Capacity Left / Right 2.5" / 2.0" X-Axis Travel (Both) 7.68" Z-Axis Travel (Left / Right) 10.43" / 30.71" Spindle Motor 30 Min. / Cont. 20 HP / 15 HP Spindle Speed 50 - 5,000 RPM Rotary Tool Motor 5 HP Rotary Tool Speeds 48 - 3,600 RPM Spindle Nose / Bore Left / Right …

Price on request

USA

NAKAMURA TW-20 MM Cnc lathe Sold

Year: 2000

control FANUC Tome power capacity 18,5/15 and 15/11 kW chuck-Ø 250 mm 12 fold revolver with driven tools chip to chip time 3 sec. parts catcher chip conveyor spindle synchronization helical interpolation 8 live tool holders 16 standard tool holders turning diameter 270 mm turning length 192 mm control Fanuc Tome turning speed range – spindle 50 - 4.500 rpm Number of Turret 2 pos X-axis 395 mm Y-axis ± 40 mm Z-axis 265 mm

Price on request

Switzerland

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1996

MAX. TURNING DIAMETER ............. 10.63" MAX. TURNING LENGTH ............... 7.56" BAR CAPACITY LEFT & RIGHT ......... 2" SPINDLE NOSE ...................... A2-6 SPINDLE SPEEDS MAX. ............... 5000 RPM SPINDLE DRIVE MOTORS .............. 20HP ROTARY TOOL SPEED MAX. ............ 3600 RPM EQUIPPED WITH - FANUC 16-TT CNC CONTROL - (2) 8" 3-JAW HYD. CHUCKS - (2) 12 STATION TURRETS - (6)ROTARY TOOLHOLDERS - PARTS CATCHER - CHIP CONVEYOR - LNS QUICKLOAD SERVO MAGAZINE BARFEED

Price on request

USA

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1990

Chuck Size (2) 10" Hyd. Machine Dimensions 144"x79"x78" Machine Weight 15,228 lbs. Maximum Bar Capacity 2.52" Maximum Turning Diameter 11.02" Maximum Turning Length 11.81" Rapid Traverse X / Z 472 IPM / 945 IPM Rotary Tool Motor 5 HP Rotary Tool Speeds 180 - 3,600 RPM Spindle Motor 30 Min. / Cont. 25 HP / 20 HP Spindle Nose / Spindle Bore A1-8" / 3.15" Spindle Speed 35 - 3,500 RPM Turret Type (All Live) (2) 12 Pos. Turrets X-Axis …

Price on request

USA

Nakamura TW-20MM CNC lathe Sold

Year: 1997

Additional Equipment: Gantry Loader, C axis to both Spindles Bar Capacity: 64mm C axis: 0.001 Degree both Spindles Control: FANUC 16TT Maximum Cutting diameter: 270mm Maximum Cutting Length: 190mm Milling RPM: 6000rpm Number of axis controlled: 6 Spindle Motor Power: 18kW Spindle Nose: A2-5 Spindle Speed: 45 - 5000rpm Turret Positions: 12 Station each Turret (2 off) Description: Sub Spindle, Swarf conveyor, Coolant, 3 Jaw Chuck, Parts Loader, Twin Turret

Price on request

United Kingdom

Used NAKAMURA TW-20MM Cnc lathe, 6-AXIS Sold

Year: 2003

SPECIFICATIONS SWING OVER SLIDE COVERS:10.63” DISTANCE BETWEEN SPINDLES:42.52” MAX. TURNING DIAMETER / LENGTH:10.63” / 7.56” BAR CAPACITY:2.56” STANDARD CHUCK SIZE:8” SPINDLE SPEEDS: 50 – 4500 RPM L&R SPINDLE MOTOR: 20 HP L&R SPINDLE NOSE: A2-6 L&R BAR CAPACITY: 2.56” C-AXIS:.001 DEGREE TURRET HEAD TYPE:DODECAGONAL L&R NO OF TOOL STATIONS:12 (24) L&R NO. OF ROTATING TOOL STATIONS: 12 L&R MILL SPINDLE SPEED / SPINDLE MOTOR: 30 – 3600 RPM / 5 HP X-AXIS TRAVEL: 7.68” Z-AXIS TRAVEL: L: 10.43” / R: …

Price on request

USA

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1997

Price on request

Poland

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1994

Swing Over Bed...........................10.6 In Max Turning Diameter.....................10.6 In Max. Turning Length..................... 7.6 In Spindle Nose.............................A2-6 Spindle Bore.............................2.5 In Spindle Speeds...........................50 - 5000 RPM Total No. of Tools.......................24(12 x 2) Effective Slide Travel Left Unit X-Axis..............................7.7 In Z-Axis..............................10.4 In Effective Slide Travel Right Unit X-Axis .............................7.7 In Z-Axis..............................30.7 In Rapid Traverse: X - Axes............................472 IPM Z - Axes............................945 IPM Live Tool Speed..........................45 - 3600 RP EQUIPPED WITH Fanuc 0-TTA Control Barfeed 3 LIVE TOOLS INCLUDED Many Misc. Holders (ID/OD) Full C …

Price on request

USA

Nakamura TW-20MMYY cnc lathe Sold

Year: 1998

Nakamura TW-20MMYY, CNC lathe with GR- 210 portal loader, counter spindle u. C-axis Used, built in 1998 Fanuc 18 TC control 20 workpiece pallets, 450mm stack height 2 automatic tool setting arms 64 Tool Compensation 160 m program memory 12-fold revolver Bar passage 51mm Turning length: 250mm Turning diameter: 195mm Drive power 15/11 kW Automatic central lubrication of all axes Mobile coolant tank with Coolant level monitoring 2 Brinkmann HD pumps, type TH 45/390 / 15 bar, pole-changing via M …

Price on request

Vietnam

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1997

Mod: TW-20M S/N: W24004 For bars Diameter max. collet: mm. 65 With subspindle 3 jaw Diameter: mm. 160 Turret tool-holders for collets for 12 tools, complete of tool-holders normal and live Turret for 12 tools for subspindle with normal tool-holders With pieces unloader Automatic bar magazine loader « ALPS TOOL » type AX-3 Complete of chip conveyor with tank Loader size: 4000 X 700 X 1150 Machine size: 4000 X 2000 X 2000 CNC FANUC OT-C

Price on request

USA

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1994

SPECIFICATIONS (1) USED NAKAMURA-TOME TW-20MM CNC TURNING CENTER NEW 1994 Swing Over Bed...........................10.6 In Max Turning Diameter.....................10.6 In Max. Turning Length..................... 7.6 In Spindle Nose.............................A2-6 Spindle Bore.............................2.5 In Spindle Speeds...........................50 - 5000 RPM Total No. of Tools.......................24(12 x 2) Effective Slide Travel Left Unit X-Axis..............................7.7 In Z-Axis..............................10.4 In Effective Slide Travel Right Unit X-Axis .............................7.7 In Z-Axis..............................30.7 In Rapid Traverse: X - Axes............................472 IPM Z - Axes............................945 IPM Live Tool Speed..........................45 - 3600 RPM NOTES EQUIPPED WITH: Fanuc 0-TTA Control …

Price on request

USA

Used Nakamura TW-20MM Cnc lathe Sold

Year: 1994

SPECIFICATIONS: (1) USED NAKAMURA-TOME TW-20MM CNC TURNING CENTER NEW 1994 Swing Over Bed...........................10.6 In Max Turning Diameter.....................10.6 In Max. Turning Length..................... 7.6 In Spindle Nose.............................A2-6 Spindle Bore.............................2.5 In Spindle Speeds...........................50 - 5000 RPM Total No. of Tools.......................24(12 x 2) Effective Slide Travel Left Unit X-Axis..............................7.7 In Z-Axis..............................10.4 In Effective Slide Travel Right Unit X-Axis .............................7.7 In Z-Axis..............................30.7 In Rapid Traverse: X - Axes............................472 IPM Z - Axes............................945 IPM Live Tool Speed..........................45 - 3600 RPM NOTES EQUIPPED WITH: Fanuc 0-TTA Control …

Price on request

USA

Used Nakamura-Tome, Model TW-20MMY Cnc lathe with Fanuc 18T CNC Control Sold

Year: 1997

SPECIFICATIONS: EACH SPINDLE: Max. Bar Capacity .................... 2" Chuck Size ........................... 8" Std. Turning Diameter ................ 8.46" Max. Turning Diameter ................ 10.63" Max. Turning Length .................. 7.56" Distance Between Spindle ............. 42.51" Main Spindle Nose to Turret .......... 4.33" - 14.76" Spindle Speeds ....................... 50-5000 RPM Spindle Drive Motors ................. 20 HP Spindle Hole Diameter ................ 2.56" X-Axis Travel ........................ 7.68" Z-Axis Travel ........................ 24" Y-Axis Travel ........................ 6" EQUIPPED WITH: Fanuc 18T CNC Control (2) 12-Position Live Milling Turrets …

Price on request

USA

NAKAMURA TW-20 MMY Double spindle precision lathe Sold

Year: 1998

Lathes left side XYZ plus C axis, right side XZ and C axis, two turrets, all driven with piece removal handling, control Nakamura - TOME, left side power on 23782 hours, working time 16995 hours, cutting time 23286 hours, right side power on 23782 hours, working time 10988 hours, cutting time 13366 hours, with belt filtering system - manufacturer KOWAP, cartridge filter 0 to 60 bar, oil mist extraction Absolent ODF1000c, chip conveyor, with tool holder, without tools, without loading …

Price on request

Switzerland

NAKAMURA TW-20 MM Cnc lathe Sold

Year: 1991

control FANUC OTX2 subspindle turret 1 with X- and Z-axis X 175 / Z 240 turret 2 with X- and Z axise X 175 both turrets with drive device C-axis on both spindles parts catching device drive capacity kW L 5,5 / 7,5, R 3,7 / 5,5 spindle speed L / R 50 – 5000 rpm chip conveyor various tool fittings, also driven collet chuck on main and subspindle 3-jaw chuck for subspindle bar feeder FMB Turbo 3000/1700/50 turning length …

Price on request

Switzerland

Turning length	200 mm
Turning Ø	165 mm
Ø above the bed	270 mm
Length between centers	320 mm
Type of CNC
X-axis	193 mm
Z-axis	264.2 mm
Spindle taper	A2-5
Spindle bore	51 mm
Number of turrets	2
Number of tools on turret	12
Number of rotating tools	8
Turning speed	5000 rpm
Spindle motor power	7.5 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	2800.0 × 1800.0 × 1900.0
Weight	5500 kg

Nakamura TW-20MM

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?