Nakamura WT-250

Manufacturer	Nakamura
Model	WT-250
Category	Lathes - cnc lathes

View current offers

Specifications

Turning length	555 mm
Turning Ø	250 mm
Ø above the bed	250 mm
Type of CNC	FANUC
X-axis	195 mm
Z-axis	600 mm
Spindle taper	A2-5
Spindle bore	61 mm
Number of turrets	2
Number of tools on turret	12
Number of rotating tools	12
Turning speed	4500 rpm
Spindle motor power	15 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	nan × nan × nan
Weight	7985.5 kg

Nakamura WT-250 Y cnc lathe Sold

Year: 2004

maximum turning diameter mm. 250 cnc Fanuc 18i-TA spindle and counter spindle upper motorized turret with C and Y axis motorized lower motorized turret with C axis LNS Sprint bar feeder standard accessories year 2004

Price on request

Italy

CNC Lathe Nakamura WT-250Y Sold

Year: 2004

Machine Type CNC Machine Machine MFG Nakamura Machine Model WT-250Y Sub Type 1 Lathe - CNC Sub Type 2 Specifications MAIN SPINDLE DIRECTION Horizontal TURNING DIAMETERS MAXIMUM:9.840 " TURNING LENGTHS MAXIMUM:21.850 " MAXIMUM SWING 9.840 " CHUCK DIAMETER STANDARD: MAXIMUM:10.000 " COLLET TYPE/CAPACITY -- BAR CAPACITY STANDARD: MAXIMUM:2.500 " SUB-SPINDLE TURNING DIAMETERS NOMINAL: MAXIMUM:9.840 " MAXIMUM SWING 9.840 " BAR CAPACITY 2.050 NOSE: A2-5 BORE: 2.480 " SPEED: 59 - 4500 RPM DRIVE MOTOR (HP): 15.0 HEADSTOCK - SPINDLE 1 …

Price on request

USA

Used NAKAMURA WT-250 Cnc lathe Sold

Year: 2002

* 3 jaw hydraulic chuck KITAGAWA BB08 u. BB 206 * collet chuck Crawford CDC66 * tool setter * 8 driven tool holders * swarf conveyor * parts catcher * turret 2 x 12 stations * bar feeder FMB Turbo 10-65/4200 (4 m)

Price on request

Switzerland

Used NAKAMURA WT-250 Cnc lathe Sold

Year: 2000

# 4 axis turning center # C-axis # live tools # 2 turrets turret Ø 800 mm # coolant pump pressure adjustable 5-15 bar # chip conveyor # bar feeder IRCO PROFIMAT

Price on request

Switzerland

Nakamura CNC lathe type WT-250 Sold

Year: 2000

Fanuc 18I-T control 2 spindles Ø65mm 2 turrets, each with 12 rotating tools 4 axis turning with 2 c-axes and 1 y-axis Max. Diameter: Ø250 mm Max. Turning Length: 550mm Gantry loader type GR203 with 12 stations

Price on request

Denmark

Nakamura WT-250 cnc lathe Sold

Year: 2001

CNC lathe model WT250 including short loader and chipper evacuator, running machine.

Price on request

Italy

Nakamura WT-250 cnc lathe Sold

Year: 2002

IEMCA bar feeder Chip conveyor Fanuc 18i control unit Double chuck Double turret with C axis Turning length : 555 mm Turning diameter : 250 mm Some live tools including

Price on request

Turkey

Used Nakamura WT-250. Cnc Turning Center, w/ Fanuc 18i-TB CNC Control Sold

Year: 2007

Specification Capacity Swing over Slides 7.48" Bar Capacity L / R 2.0" Chuck Size 6" L / R Spindles I.D. of Front Bearing 3.5" Hole Through Draw Tube 2.04" Spindle Center Height 45.27" C-Axis Least Input/Command Increment 0.001 Deg. Rotation Speed 600 RPM Turret No. Tool Stations (Upper/Lower) 24 / 24 No. Rotating Tool Stations 12 / 12 Tool Size (Square/Round) 1.0" / 1.25" Rotating Tool Speeds 60-6000 RPM Saddle X1 / X2 Axis Travel 6.20" / 6.59" Z1 / …

Price on request

USA

Used Nakamura WT-250 Cnc lathe with CNC Control Fanuc 18iTA Sold

Year: 1998

CNC Control: Fanuc 18iTA Max. Swing Over Bed & Saddles: 9.84" Max. Turning Diameter: 9.84" Max. Turning Length: 21.85" Bar Capacity: 2.5" Travel: X1/X2: 7.67" Z1/Z2: 23.62" Speeds: X1/X2: 472 IPM Z1/Z2: 945 IPM Main Spindle: Speed: 4,500 RPM Nose: A2-6 Sub-Spindle: Speed: 4,500 RPM Nose: A2-5 # of Tools Per Station: 12/12 Power: 220 Volts AC Weight (approx.): 17,600 lbs EQUIPPED WITH (must be verified by buyer) Rear Mounted Chip Conveyor Misc. O.D. & I.D. Tooling Tool Setter 8" …

Price on request

USA

Used Nakamura WT-250 Cnc lathe Sold

Year: 1998

SPECIFICATIONS CNC Control: Fanuc 18iTA Max. Swing Over Bed & Saddles: 9.84" Max. Turning Diameter: 9.84" Max. Turning Length: 21.85" Bar Capacity: 2.5" Travel: X1/X2: 7.67" Z1/Z2: 23.62" Speeds: X1/X2: 472 IPM Z1/Z2: 945 IPM Main Spindle: Speed: 4,500 RPM Nose: A2-6 Sub-Spindle: Speed: 4,500 RPM Nose: A2-5 # of Tools Per Station: 12/12 Power: 220 Volts AC Weight (approx.): 17,600 lbs NOTES EQUIPPED WITH / (must be verified by buyer): Rear Mounted Chip Conveyor Misc. O.D. & I.D. Tooling …

Price on request

USA

2001 NAKAMURA-TOME WT-250 Sold

Year: 2001

MACHINE SPECS: CONTROL: FANUC MAXIMUM SWING: 9.8" TURN DIAMETER: 9.8" MACHINING LENGTH: 17" SPINDLE BORE: 2.4" BAR CAPACITY: 2" CHUCK SIZE: 8" SPINDLE SPEED: 4500 RPM MAIN MOTOR: 20HP TURRET POSITION: (2)12 LIVE TOOLING/MILLING: YES EQUIPPED WITH: Fanuc Series 18i-TB Control All Available Manuals Chip Conveyor Parts Chute Type G Milling LNS Quickload Servo Barfeeder High Pressure Coolant Pump

Price on request

USA

Nakamura WT-250

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?