Schaublin 102-80

Manufacturer	Schaublin
Model	102-80
Category	Lathes - 0 - 3000 mm

View current offers

Specifications

Length between centers	320 mm
Center height	102 mm
Turning length	100 mm
Turning Ø	100 mm
Ø above the bed	200 mm
Ø above transversing slide	120 mm
Diameter in the gap	mm
Max workpiece weight	kg
Spindle nose	F27
Spindle bore	20 mm
Turning speed	2500 rpm
Spindle motor power	1.5 kW
Overhauled	no
Year of overhauling
-------------------
Length x width x height	1200.0 × 600.0 × 1300.0
Weight	500 kg

Schaublin 102-80 Sold

Year: 1960

Tour Schaublin type 102-80 très bon état BL 122533 - 1960 Bati fonte avec 2 tiroir Chariot Contre-poupée Mandrin Reishauer 3 mors jeu de plus de 50 pinces 2 lunettes divers petits accessoires Lampe Renvoi simple Poulie 3 étages

Price on request

France

Tornio parallelo SCHAUBLIN 102-80 Sold

Year:

Larghezza del banco: 100 mm Diametro cannotto contropunta: 30 mm Cono contropunta: 20 mm

Price on request

Italy

Used SCHAUBLIN 102-80 Lathe Sold

Year:

CENTRE HEIGHT 102mm DISTANCE BETWEEN CENTRES 470mm SWING OVER BED 200mm SWING OVER CROSS-SLIDE 120mm HEADSTOCK DISTANCE SPINDLE CROSS TO vis W20 MAXIMUM BORE THROUGH CHUCK 14.5mm TOOL SECTION 12x12mm TAILSTOCK TOTAL STROKE 80mm TAILSTOCK TAPER: 2 CMISO

Price on request

Switzerland

Schaublin 102-80 lathe Sold

Year:

Schaublin 102-80 Tower Type Conventional tower Reference C237 Model 102-80 Chip tray Chip conveyor spray Glasses to follow Chuck 100 Ø 100 mm 3 jaws Tool holder - 3 tools feeder tongs

Price on request

France

Used Schaublin, Model 102-80. Precision Secondary Operation Lathe Sold

Year:

Technical Specs: 220V/3PH/60HZ Center height: 102 mm Swing over cross slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20W Spindle speeds: 55 to 3000 RPM Taper in tailstock: 2 MT Spindle motor: 1.5 KW Equipped with: 3-jaw chuck Tailstock drill chuck

Price on request

USA

SCHAUBLIN 102-80 Lathe Sold

Year:

Lathes Serial number 194383 BL, centre width approx. 470 mm, spindle speed 5000 rpm, spindle diameter approx. 20 mm, including accessories

Price on request

Switzerland

SCHAUBLIN 102-80 Turret lathe Sold

Year:

- Revolver - Mandrin à pinces, - Nombreuses pinces.

Price on request

France

Schaublin 102-80 lathe Sold

Year: ~ 1980

Schaublin 102 80 tower in good condition. F27 clamping With revolver turret, tailstock, carriage, set of pliers F27, 6 pliers holder ER16 + pliers ER16 (approx. 20) + tool holder + tank and lubricant pump. Operates at 380 V

Price on request

France

Schaublin 102-80 lathe Sold

Year: 1966

Centre height 102 mm Distance between centres 470 mm Swing over cross-slide 120 mm Swing over bed 200 mm Spindle hole 20.0 mm Inner taper type 20 W Taper spindle threaded Taper in tailstock: 2 MT Voltage 50 Hz 3x 380 Volt Machine's weight about 500 kg Overall dimensions machine: Length 1300 mm Width 600 mm Height 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Driving plate Cross slide with 90 mm stroke Hand rest

Price on request

Switzerland

Schaublin 102-80 Swiss type lathe Sold

Year:

TECHNICAL FEATURES: • PASS BAR DIAM. 23 MM • 220 VOLTAGE PHASE • COMPLETE SHELTER WITH MICRO AND EMERGENCY PUSH • FULL TOWER • DRIVE EVEN A KNEE • WEIGHT Q.LI 5

Price on request

Italy

SCHAUBLIN 102-80 Lathe Sold

Year:

TAIL CENTRE 1 CHUCK ADAPTOR 1 TOOL HOLDER 1 TAPER IN TAILSTOCK 1M VOLTAGE 50 HZ 3X 380Volt

Price on request

Switzerland

Schaublin 102-80 used lathe Sold

Year:

Characteristics * Reductor stock W 25 * Tailstock CM 2 * Bed length 1000 mm Equipment * Worklight * W25 14 clamps set * Tenser transmitter * W25 Grip shank * Driving plate

Price on request

Switzerland

Použitý hrotový Schaublin 102-80 Sold

Year:

Oběžný prům. nad ložem 120 mm Vzdálenost mezi hroty 500 mm příslušenství : kleštiny,držáky

Price on request

Czech Republic

Schaublin 102-80 lathe Sold

Year:

Price on request

France

Schaublin 102-80

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?