Machine's specifications - Weinig UNIMAT 23 EL Used machines

Manufacturer	Weinig
Model	UNIMAT 23 EL
Category	Moulders - multihead

WEINIG UNIMAT 23 E Moulder Sold

Year: 1998

Price on request

Poland

WEINIG UNIMAT 23 E Moulder Sold

Year: 1997

Price on request

Poland

8 SPINDLES MOULDER WEINIG UNIMAT 23 EL Sold

Year: 2001

8 SPINDLES MOULDER WEINIG UNIMAT 23 EL - cardan feed - rollers on the table - spindles speed 8000 rpm - composition * bottom 5,5 KW * vertical right 5,5 KW * vertical left 7,5 KW * vertical right 7,5 KW * top 7,5 KW * bottom 7,5 KW * top 7,5 KW * universal 5,5 KW - short pieces feeding rollers -manual pump lubrication -feeding unit CE rules year 2001

Price on request

Italy

Weinig Unimat 23 EL Used multihead moulder Sold

Year: 1999

Four- side moulder Weinig, Type: U 23 EL with grooved table and 2 Mobilspindles. Working width 20 – 230 mm Working height increased to 160mm 8 – 160 mm Jointer table 2.5 m long (including the fin line) Grooved table hardened (not suitable for dismantling), with insert strip (minimum working width 25 mm, chip removal with the dressing spindle max. 7 mm) Spindle arrangement 1. First lower 11 kW, 6000 Upm 2. First rights 7,5 kW, 6000 Upm 3. First …

Price on request

Germany

WEINIG UNIMAT 23 EL Used multihead moulder Sold

Year:

TECHNICAL PARAMETERS : - Working width 230 mm - Working height 200 mm - Feed speed 7 - 36 m / min - 8-head machine with a diameter of 40 mm spindles fi - For wood wet and dry - Drive 4 rolls in the lower table - All spindles are adjustable scraper System heads: 1) head horizontal lower 7.5 kW 2) head vertical right 11 kW 3) head vertical left 11 kW 4) The head vertical right 11 kW …

Price on request

Poland

Weinig Unimat 23 EL Sold

Year: 2001

Purpose: The four-sided machine is designed for the production of molded products (block house, floor board, lining, casing, bars, skirting boards and other shaped products) Condition of the equipment: the machine is connected, ready for viewing. Features of the machine: Four-side planer used Weinig Unimat 23 EL refers to a heavy series of machines. - Three shafts (L, P, B1) have an angular velocity of 8000 rpm, the remaining 6000 rpm - The last two shafts (H2 and B2) have …

Price on request

Russia

WEINIG Unimat 23 EL Planing machine Sold

Year: 2004

Applicable working size: 230 x 120 mm Shaft speed: 6000 rpm Feed: 5 - 36 m / min Input table: 3500 mm Including stacker for finished products CE standard Shaft assembly: 1-bottom: 5.5 kW 2-right: 7.5 kW 3-left: 7.5 kW 4-top: 7.5 kW 5-bottom: 5.5 kW 6-top: 5.5 kW The machine is in EXCELLENT CONDITION and FUNCTIONAL (after inspection in 2021)

Price on request

Italy

Used WEINIG UNIMAT 23 EL Moulder Sold

Year:

Capacity: 260 x 160 mm. Feedmotor 5,5kW, feedspeed up to 36 m/min 7 spindles: Bottom 7,5 kW, fence 7,5 kW, near 11 kW, top 15 kW, bottom 22 kW, splitting unit 2 x 37 kW automatic Waxilit pump short infeed table 1m20 with 3 infeedrollers Sound enclosure Table rollers

Price on request

Belgium

WEINIG UNIMAT 23 EL Planer and Moulder Sold

Year: 1997

Planing machines With 10 spindles, one of which is a 360° universal spindle groove bed guide, working width 220 mm working height 160 mm milling head diameter 40 mm different feed rollers Example 140 x 50 x 15 mm machine number 101550, 3 x 380 V, 50 Hz rated current of largest motor 41.5 A rated current 245 A main fuse 315 A power 113 kW connection Chip extraction connection extraction gap unit 140 mm connection saw spindle 200 mm …

Price on request

Poland

Used Weinig, Model Unimat 23 E. Moulder Sold

Year: 1996

Photos............. Upon Request Description: 6-Head moulder w/Rondamat 960 grinder 10 HP Bottom 10 HP Right 10 HP Left 15 HP Top 10 HP Top 10 HP Bottom Technical specs. working width 3/4" - 9 1/16" working height 5/16" - 4 3/4" spindle speed 6000 rpm spindle diameter 40mm clamping length horizontal 9 1/2" clamping length vertical 6 3/4" feed speed variable 20 - 120 ft/min 3 powered rollers in machine table reduced distance between feed rollers reference engraver for first …

Price on request

Canada

Used Weinig Unimat 23 E Planing machine Sold

Year: 2003

Price on request

Poland

Weinig Unimat 23 EL Moulder Sold

Year:

Used WEINIG Unimat 23 EL - capacity 300 X 160 mm - 5 toolholders - planer 10 hp, 10 hp top right, top left 10 hp, 10 hp higher plane, lower plane 10 hp - electronic control ATS width and height with integration tools Ø door - automatic sequential lubrication - against bearing hydraulic clamping on three horizontal shafts - air pressure - rollers in the table

Price on request

France

Used Four Side Planer, 8-Spindle Moulder WEINIG UNIMAT 23 EL + Feed System HIGH MECH E1/L Sold

Year: 2004

Four Side Planer, 8-Spindle Moulder WEINIG UNIMAT 23 EL + Feed System HIGH MECH E1/L Type/Model: UNIMAT 23 EL, U 23 EL Construction Year: 2004 Technical Details: • Working width (in Tool diameter 140 mm): 20-230mm • Work Height (Tool diameter 163 mm): 8-120mm 1. First lower horizontal spindle • Motor with brake 18.5 KW (25 HP) • Diameter 40 mm • Speed 6000 rpm • Tool diameter 125-180 mm • Displacement axial 17 mm • Folding device, incl. Tool …

Price on request

Poland

Weinig UNIMAT 23 E Used multihead moulder Sold

Year:

Mod. UNIMAT 23 E - Brushed width 230 mm - Brushed height 120 mm - Number of spindles 5 - Motorized adjustment - Table length 2000 mm

Price on request

Spain

WEINIG UNIMAT 23 E Moulder Sold

Year: 1996

- Towing shaft drive - Floor grooved - Groups feed rollers close together (Tandem) - Composition: - Lower horizontal Kw 4 - Vertical dx 4 Kw - Vertical sx 5.5 Kw - Vertical dx 5.5 Kw - Upper horizontal Kw 5.5 - Upper horizontal Kw 5.5 - Lower horizontal Kw 5.5 - 1996 - Driving motor Kw 5.5 - Universal 5.5 Kw - Queens. 023-2304 - Dimensions cm. 610x190x180 cm

Price on request

Italy

Four moulder with splitting units inkl. Cross conveyor chains with accelerator Weinig Type 814 Sold

Year:

Four moulder with splitting units inkl. Cross conveyor chains with accelerator Weinig Type 814 Working width 20 – 230 mm Working height 10 - 120 mm Machine table Short table 1000 mm Drive roller in the machine table before 1 bottom spindle and 5 drive rollers in the machine table Spindle assembly: 1. Bottom spindle 7,5 kW 2. Right spindle 7,5 kW 3. Left spindel 7,5 kW 4. Right spindle 7,5 kW 5. Top spindle 7,5 kW 6. Bottom spindle …

Price on request

Germany

WEINIG UNIMAT 23 EL Moulder Sold

Year: 2000

Moulder to 7 trees: 1 planer lower 11kw, 2 shapers dx 7.5 kw, 3 moulder sx 7.5 kw, 4 lower multilame 37 kw, 5 top 11 kw, 6 less than 7.5 kw jointer, 7 upper 7.5 kw jointer, Advancing 8.6 kw Central greasing Pneumatic pressure on the trailer rollers 2000 Machine in very good condition

Price on request

Italy

Used Four Side Planer, 7-Spindle Moulder WEINIG UNIMAT 23 EL Sold

Year: 2003

Four Side Planer, 7-Spindle Moulder WEINIG UNIMAT 23 EL Type/Model: UNIMAT 23 EL, U23 EL Construction Year: 2003 Documentation: Full Technical Documentation in Polish 1 Pneumatic connection: • Nominal pressure: 8 bar • Operating pressure min. /max.: 6/10 bars 2 The workpiece • Width min / max on the tool diameter. 140mm: 20/230 • Height min / max on the tool diameter. 163mm: 8/160 • The minimum length of the workpiece: 240mm 3 Feed • Feeding motor power: 7.5 kW …

Price on request

Poland

WEINIG UNIMAT 23 EL Moulder Sold

Year: 1999

GENERAL SPECIFICATIONS ► Industrial machine with heavy-duty structure ► Max. working width 230 mm ► Max. working height 120 mm SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Feeding system through cardan joints ► Bottom motorized rollers inserted on the work table ► Top pression made by: - top motorized grooved wheels - top motorized rubbered wheels ► Top pression unit with adjustable height ► Adjusting in continuos speed with regulation by motovariator ► Extension length of the work table …

Price on request

Italy

Used Weinig Unimat 23 EL Moulder Sold

Year: 2000

Price on request

France

WEINIG UNIMAT 23 EL Moulder Sold

Year:

Price on request

Slovenia

WEINIG Unimat 23 EL Planing machine Sold

Year: 2004

Usable working size: 230 x 120 mm Spindle speed: 6000 rpm Feed: 5 - 36 m/min Input table: 3500 mm Including folding device for finished products CE standard Shaft Assembly: 1-Bottom: 5.5 kW 2-Right: 7.5 kW 3-Left: 7.5 kW 4-Top: 7.5 kW 5-Bottom: 5.5 kW 6-Top: 5.5 kW Machine is in EXCELLENT CONDITION and FUNCTIONAL (after inspection in 2021)

Price on request

Czech Republic

Weinig Unimat 23 EL Used multihead moulder Sold

Year: 2000

Features - Four side planer - WEINIG UNIMAT 23 EL Cutting width mm 230 Cutting height mm 160 Number of spindles 6 Spindle layout down / right / left / right / up / down Spindle speed max / min 8000 The spindle moves like this Motor adjustment Height and width of planing Length of insertion table mm 2000 The table is grooved yes Table driven rollers Feed rate max m / min 36 Kardan roll feed drive Lower spindles …

Price on request

Poland

WEINIG UNIMAT 23 E Used multihead moulder Sold

Year: 1997

WEINIG UNIMAT 23 E multi-spindle moulder Year 1997 plates in pictures

Price on request

Spain

Weinig Unimat 23 EL Used multihead moulder Sold

Year: 2003

Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5 kW Right 4 kW Left 5.5 kW Right 4 kW Top 11 kW Bottom 5.5 kW Top 7.5 kW Bottom 7.5 kW Feed speed adjustable on the variator Feed driven by a cardan shaft Driven rollers in the table Pneumatic clamps CE certificate Year of production 2003 The machine will be in our warehouse soon

Price on request

Poland

WEINIG UNIMAT 23 E Used multihead moulder Sold

Year: 2003

Four-side planer WEINIG UNIMAT 23 E Year: 2003 Working height: 180 mm Working width: 260 mm 6 heads: 1 lower horizontal head 4 kw 1 vertical right head 1 vertical head left / common engine 11 kw 1 upper horizontal head 7.5 kw 1 upper horizontal head 7.5 kw 1 lower horizontal head 7.5 kw Feed table 2480 x 260 Feed wheel drive - Cardan shafts Pressure of feed wheels pneumatic Infinitely variable feed adjustment 5- 24 m / min …

Price on request

Poland

Weinig UNIMAT 23 E Used multihead moulder Sold

Year: 1999

WHEEL-PROFILER with 6 tool holders 230 x 120 mm. - Machining width / height capacities: 230 x 120 mm. - Entrance table: 2500 mm. - 6 tool-holder shafts Ø: 40 mm. - Spindle rotation speed: 6,000 rpm. - Motorized adjustment of working width and height. - all the settings brought back to the front, accessible with the hood closed - Each of the settings is provided with a SIKO digital counter. - Enveloping and soundproofing cover, with large panoramic window. …

Price on request

France

Weinig UNIMAT 23 EL Used multihead moulder Sold

Year: 2000

Four Side Planner, 5-Spindle Moulder WEINIG UNIMAT 23 EL Construction Year: 2000 Technical Details: Number of spindles: 5 Spindle order: bottom, right, left, bottom, top Spindle diameter: 40mm Spindle rotation speed max: 6000RPM Each spindle on separate motor Variable feed speed Electrical height adjustable ATS System Max working wight: 230mm Max working heigh: 160mm Infeed table length: 2000mm Automatic lubrication pump CE Mark

Price on request

Poland

Weinig UNMAT 23 EL Moulder Sold

Year: 2002

Due to the change in the profile of activity to sell Planer Moulder WEINIG UNIMAT 23 EL very good condition. Ideal for flooring - HYDRO finishing head. Due to the size of engines working at a speed of 36 m / min. Equipped with a set of tools with spiral heads and cutters to the floorboard bevelled. Large amounts of spare blades HM.

Price on request

Poland

Working width	230 mm
Working height	120 mm
Nbr of shafts	5
Shafts diameter	40 mm
Sound proof cabin
Feeding table length	2000 mm
Feed speed	36 m/min
Engine power	5.5 kW
-------------------
Length x width x height	5500.0 × 2000.0 × 1800.0
Weight	3200 kg

Weinig UNIMAT 23 EL

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?