Description
The temperature control unit TT-708 Y is constructed for special applications and for permanent
temperatures up to maximum +300°C. It is equipped with a closed hot oil circuit with integral cold oil
receiver in a large dimensioned expansion tank. Therefore there is no risk of oil “cracking”. A long life
expectancy of oil is achieved due to the low loaded heater elements and the high flow rate.
The units correspond to the harmonized EU norms as EN 292 / EN 60204 as well as to the relevant
EU directives (see conformity declaration) and are provided with the CE sign.
The TT-708 Y is available in 3 different heating versions:
- 72 kW
- 120 kW
- 144 kW
The different models are marked by the name plate on the front of the unit.
9,000 hours on the clock
This manual is valid for these 3 executions.
The serial equipment consists of:
- self-optimizing temperature controller with digital display of the set and actual temperature. Display
in 1/10-° range. Switchable from °C to °F
- automatic temperature monitoring. Deviation between effective and set temperature activates an alarm
- digital display of flow with monitoring of the minimum flow
- leak-proof high temperature pump
- heating switchable in stages
- lime-free heat exchanger
- horn for fault messages
- automatic level control – dry run protection
- mechanical safety thermostat and electronic temperature limiter installed in the controller
- with main switch, automatic cut-out, transformer and motor protection switch
The unit must be so installed, that all 4 rubber feet are on the ground. The unit should in no case be
balanced on 3 feet only.
9,000 hours on the clock
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase