Description
German branded water jet machine with two active heads
Model: HP19 / 37-S
Year of issue: 2007
Pressure 4000 bar
Working table width 3000x6000 mm
Fully working
Located in Almaty. You can come and see.
The CNC water jet cutting machine cuts any materials up to 300 mm thick (except for tempered glass) with an abrasive water jet, with a cutting width of about 1.1 mm
Benefits:
Highest quality of the resulting edges (often requiring no additional machining)
The edges of the material are not subject to thermal stress - no oxides, scale
Allows to cut bags consisting of several layers of different materials
Provides the ability to cut various composite materials, since no breaks are created in the material structure
Allows to process materials with wavy surfaces and complex contours
Free of dust and gases
Small cutting width of 1.1mm - minimum waste
Low tangential cutting force per part - the workpiece is not clamped
High cutting speed - up to 20,000 mm / min
Complete explosion and fire safety of the cutting process.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase