Barber Colman 14-15 Horizonta

Listing description

Suitable For The Cutting/Hobbing Of Spur And Helical Gears,
Splines/Pinions And Sprockets Up To 14"(356Mm) Diameter
And 15"(381Mm) Length/Face-Width.

Equipment / Features:
Standard Hob Head W/Anti-Friction Bearing Spindle
Anti-Friction Bearing Workspindle
Double-Thread Index Worm, Hardened & Ground, Bronze Worm Gear
Built-In Differential Mechanism
Coolant Pan & Piping
Power Forced Lubrication To All Working Elements
Automatic Hobshift, Clamped During Working Cycle
Hob Reversing Drum Switch
Dwell Timer For Blind Cuts
One (1) Hob Arbor

One Single Set-Up Of Change Gears For Index,
Differential, Feed And Speed
Hydraulic Chucking Work-Head W/Work Spindle Adaptor
Hydraulic Operated Tailstock W/Center
Outboard Hydraulic Unit Complete
Full Complement Of Electrics (Motors, Controls)
(Presently Arranged For 440 Volt 60, Hz Operation)
Misc. Guards/Covers

Principal Specifications:
Maximum Rated Work Diameter
14"
(355.6Mm)
Coarsest Pitch (Single Cut In Steel)
3.5 Dp
(7.3 Mod.)
Maximum Travel Of Hob Carriage
15"
(381Mm)
Maximum Distance, Work Spindle Face

To Tailstock Center
27.25" (692.15Mm)
Maximum Distance Work Spindle Centerline

To Hob Spindle Centerline
9.75" (247.6Mm)
Maximum Distance Work Spindle Centerline

To Hob Spindle Centerline
9.75" (247.6Mm)
Minimum Distance Work Spindle Centerline

To Hob Spindle Centerline
1.75" (44.4Mm)
Work Spindle Bore (Standard)
4.18" (106.3Mm)
Index Worm Gear Pitch Diameter
17.9" (454.6Mm)
Maximum/Minimum Number Of Teeth Cut
300/4
Maximum Hob Diameter (Standard)
6.25" (158.75Mm)
Maximum Swivel Angle (Helix) Setting R/L
50 Degrees
Maximum Hobshift Travel
4" (101.6Mm)
Main Drive Motor
10Hp
Hydraulic Pump Motor
3Hp
Lubricating Pump Motor
1/4Hp
Coolant Pump Motor
1Hp
Machine Dimensions
114"X 80-3/4"X 90"
Machine Net Weight (Approx.)
13,000 Lbs.

This equipment is located in US