Fadal VMC 15XTL Machining center - vertical

Listing description

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm.

Technical parameters of the FADAL VMC 15XTL CNC milling machine

- CNC control: Fadal
- working table length: 400 mm
- working table width: 870 mm
- maximum table load (evenly distributed): 340 kg
- number of tools in the magazine: 21 pcs.
- spindle drive power: 5.6 kW
- maximum rotary speed of the vertical spindle: 7500 1 / min.
- minimum distance between the spindle and the table: 101.6 mm
- maximum distance between the spindle and the table: 609.6 mm
- X axis travel length: 762 mm
- travel length in the Y axis: 406.4 mm
- travel length in the Z axis: 508 mm
- power demand: 17 kVA
- power of the largest AC motor: 25 A; 230 VAC
- voltage: 400 VAC
- phases: 3
- frequency: 50/60 Hz
- full load current: 22 A
- short-circuit breaking capacity: 10 kA min.
- size of the milling machine (H x L x W): 2500 x 2500 x 2400 mm
- machine weight: 3 t

The FADAL VMC 15 XTL milling center is ready for operation. We invite you to the inspection

This equipment is located in PL