Listings similar to "Heyligenstaedt Heynumat 3U X 1" 60

Chip Conveyor 12" 3 Jaw Kitagawa B-12 Hydraulic Chuck Programmable Tailstock Automatic Tool Eye - needs work Multi Tap Transformer RS-232C Port …

Maximum Swing: 18" Chuck Size: 8" Turning Diameter: 11.8" Turning Length: 13.8" Bar Capacity: 2" Tailstock Quill Diameter: 3.14" Ta…

8" 3-Jaw Manual Chuck Hand Wheels Quick Change Tool Post Tailstock Coolant System 3.5" Floppy Disk Interface RS 232 Port Interface Specifica…

Chuck size 6″ Swing over the bed 21.7" Swing over cross slide 13.8" Maximum turning length 11.8" Bar capacity 1.77" Travel x 8.3" Travel z 13" …

Make Daewoo, made in Korea Model Puma 240L Year 2003 Control Fanuc OI-TC Chuck 250.0 mm Max. Turning length 648.0 mm Max. Turning diamete…

CNC Lathes 15" 3 Jaw Hydraulic Chuck Chip Conveyor Tool Eye (not sure if working) Tailstock RS 232 Port Interface Coolant System wi…

Okuma OSP-U10L, 6" Chuck, 1.63" Bar, Parts Catcher, Tailstock, Chip Chuck Size 6" Max Diameter Bar Capacity 1.63" Spindle Motor 15 / 10 HP…

Producer: MAS Made in: 1985 Characteristic: Max. bar diameter: 22 mm Maximum-turning length: 350 mm

Turning diameter over the cross slide: 420 mm Control: Siemens Sinumerik 3T-4 Distance between centers: 1000 mm Swing over bed: 660 mm x-axis: ap…

Make Mori Seiki, made in Japan Model SL-35MC Year 1993/4 Control Fanuc MF-T6 (16T) Max. Turning dia 400mm Max. Turning lengt 780mm Swing …

Make Nakamura Tome, made in Japan Model TMC 18 Control Fanuc 21TB Year 1998 Chuck size 215.0 mm Swing over bed 400.0 mm Max turning diame…

X-axis 650 mm Z-axis 2122 mm

Made in: 1997 Characteristic: Control system: FANUC Series 0-T Maximum-turning length: 535 mm Max. turning diameter: 270 mm Turning diameter…

Tailstock Chip Conveyor 12" 3 Jaw Hydraulic Chuck RS 232 Port Interface Complete Coolant System with Tank & Pump All Available Tooling All Avai…

Center height mm. 167 Diameter over the bed mm. 330 Diameter on the carriage mm. 210 Distance between centers mm. 1000 HARRISON-GE FANUC ALPHA PL…

Ikegai model TUR-30 inclined bench lathe. Fanuc numerical control. Swing over bed 635 mm. Distance between points 1050 mm. 400 mm 3-jaw CHUCK. 2 rang…

10" 3 Jaw Hydraulic Chuck ATS S30 Collet Chuck Tailstock SMW Space Saver 2000 Barfeeder Chip Conveyor Parts Catcher IGF Conversational Programm…

GMX_200_LINEAR Multifunction spindle lathe 5000 rpm 5-axis milling head 12000 rpm store 90 tool hsk 63 watering center 40 bars filter paper.

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

Used XYZ VL 555 x 2M, just arrived, The machine comes with a quick change tool post and 3 jaw chuck and is ready for powered demonstration in our Bri…

Maximum work length: 27” Maximum diameter held in vises: 8 ½” Maximum cutter diameter: 6.3” (160 mm) Spindle speed range: 200 – 1200 R.P.M. Fe…

Control Fanuc 10t-ef "Enhanced Graphics" Swing Over Bed 620.0 Mm Swing Over Saddle 380.0 Mm Max Turning Dia 316.0 Mm Distance Between Centres 210…

4 jaw self-centering chuck Steady rest 4 way automatic turret Manuals Specifications Manufacturer Unknown Model CL-16402X Year 2010 Condit…

EQUIPPED WITH: 8" 3-Jaw Chuck Okuma OSP7000L CNC Control Live Milling Capabilities 12 Position Upper & 8 Position Lower Turret Chip Conveyor - C…

Very good condition - never used industrially. Few operating hours With many accessories Private purchase 2001 new Everything in working order M…

Controller: FANUC 210i-T Year of manufacture: 1999 Diameter allowed above the bed: 400 mm Diameter admitted in gap: 585 mm Diameter allowed on th…

The machine is in good technical condition. Control system: OSP 7000 L Conveyor trisek: yes Operating hours: 34.288 in CNC process / status as of…

The machine is in good technical condition, after prior agreement it is possible to test it.

Control Hurco Ultimax Swing over the Cross-slide 415mm Bar Capacity 78mm Chuck Size 250mm Distance Between Centers 695mm Maximum Cutting di…

Capacity Between Centres 600mm Features GE FANUC Series 0-T Control 12 Station Turret Power 3 Phase Electric’s 5.5kW 36 amps