Listings similar to "KRAUSS MAFFEI KM 250-520 C2+" 60

State-of-the-Art Krauss Maffei KM100-180-180 CXV 2-Shot Injection Molding Machine with Robot Elevate your manufacturing capabilities with the Krau…

TOSHIBA IS2200DF-200A Injection Molding Machine (2008) Hydraulic or Electric: Hydraulic Total Shots: 1,473,925 Total Hrs: 34,342 Controls: INJE…

Tie Bar Distance :460×460mm Screw Diameter :40mm Theoretical injection capacity : 200㎝3 Injection mass :190g Maximum injection pressure: 190.8Mpa…

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max…

MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] …

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

88 Ton Nissei All Electric Injection Mold Machine Shot Size: 1.13 oz. Tie Bar Spacing: 15.1" x 15.1" Platen Size: 21.4" x 21.4" Daylight: 15.1"…

Model: IS450FA2 27A Screw Diameter (MM): 80 Tie Bar H X V (MM): 810 X 810 Clamp (ton): 450 Year: 2005 Size (L X W X H) (MM): 8400 X 1600 X 3250…

55 Ton Nissei All Electric Injection Mold Machine Shot Size: 1.13 oz. Tie Bar Spacing: 12.9" x 12.9" Platen Size: 18.6" x 18.6" Daylight: 24.01…

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing …

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing…

Injection moulding machine KM 160/750 CX blue power Model: KM 160/750 CX System controll : MC6 Clamping force: 160 ton Mould clamping plates Hx…

Krauss Maffei 2000-17200MX Clamping force: 2000 ton Distance Between tie bars: 1850x1600mm Clamping plates dimensions: 2650x2400mm mold installa…

Krauss Maffei KM 3200-24500 MX injection molding machine Year of manufacture - 2014 Number of working hours - 35,775 Plasticizing system…

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

Made in: 2008 Characteristic: Total hours: 70182 Total hours: 62173 h Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201…

Made in: 2010 Characteristic: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cm³ Distance between the columns (horizo…

Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-…

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Heigh…

Clamp Force 300 Tonne (3000KN) Clamp Unit 995 x 1050mm DBTB 630 x 630mm Screw Dia 55mm Shot Weight 476g MC5 Control Year 2013 Machine has on…

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total pro…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 217 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 570 cm³ Length/diameter ratio: L/D Maximum injection rate: 618 cm³/s Pressure …

INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 40 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure on…