Listings similar to "Pearson C-3" 18

Manufacturer: SCHULER HYDRAP Model: HPDZb 500 YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the re…

Year of manufacture: 2005 Condition: very good Control system: Siemens Technical details : Machine type: SH-200-2.7 x 1.7 Fab…

Control via panel / control base stand / foot control and manual control unit Press doesn't have draw cushion device. Technical Details: press…

Electric Foot Pedal with E-Stop 2 axis CNC Capacity 132 Tons Weight 18963 lbs Approach speed 3.94" per Second Safety distance 59" Motor horse…

75 TON CINCINNATI-INC CNC GAP-FRAME HYDRAULIC PRESS New 2000, Model 75 OBS, EQUIPPED WITH: Cincinnati Pendant Mounted Microprocessor Con…

Type: 3000 kN Producer: Loire Made in: 1992 GO 2008 Characteristic: Control system: SIEMENS SIMATIC OP17 Pressing force: 3000 kN Length of t…

Made in: 2014 Characteristic: Pressing force: 105 t Length of the bottom table: 3500 mm Width of the bottom table: 1300 mm Power demand: 3 k…

MACHINE SPECIFICATION STROKE 10" PRESSING SPEED 1-52 IPM FAST APPROACH SPEED 450 IPM CYLINDER DIAMETER 7" RESERVOIR CAPACITY 175 GALLONS MAX OP…

PRESSLAND HDR-5 Hydraulic deburring presses with 4-station rotary table (OPEN GAP) Fitted with indexing rotary table. Never used. Maximum adjustabl…

HYDR. C - FRAME DEEPDRAW PRESS Capacity main cylinder : 250 Ton Capacity deep draw cushion : 100 Ton Table dimensions : 900 x 630 mm Table height…

Hydraulic cold hobbing press Swaging (wire rope clamps) Cold flow pressing (non ferrous material) Medal coining Bottom ejector Capacity Kg: …

Max. bending length: 4100mm Distance between column: 3600mm Max. pressing force: 150T Beam stroke: 215mm Approch …

SIZE :- 15" THE 150 TON CAPACITY BLANK HOLDER TYPE DEEP DRAWING HYDRAULIC PRESS IS USED TO MANUFACTURE LIGHT UTENSILS LIKE STAINLESS STEEL, ALUMIN…

The machine isn't erected and installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W…

Equipped With 150 Tons Max Down Stroke Capacity, 65 Ton Capacity on Up Stroke, Updated Automation Direct Heating Cycles, 350 Degrees Max Heat for …

The machine is in very good condition, minimally used, with a rise of approx. 7,300 hrs. It is a hydraulic double-action deep-drawing press. press…

Total pressing force 800 t Stroke 1000mm Installation height 1500 mm Table clamping area approx. 3550 x 2200 mm Ram clamping surface approx. 3550…

Type: PO/2M/P1800 Year : 2001 Ram capacity : Ton. 2000 Slide stroke : mm. 1500 Table size : mm. 5000 x 2380 Blankholder : Ton.200 Fast stro…