Listings similar to "SUMITOMO SG 180M" 60

Tie Bar Distance :460×460mm Screw Diameter :40mm Theoretical injection capacity : 200㎝3 Injection mass :190g Maximum injection pressure: 190.8Mpa…

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Tie Bar Distance :630×630mm Screw Diameter :60mm Theoretical injection capacity : 679㎝3 Injection mass :624g Maximum injection pressure: 150Mpa …

Tie Bar Distance :410×410mm Screw Diameter :40mm Theoretical injection capacity : 176㎝3 Injection mass :160g Maximum injection pressure: 157Mpa …

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing …

Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 50 Screw Diameter (mm): 32 Max Shot Weight (PS) (g): 86 Control System: Procan…

Model: ve210-960, 15.3 oz (435 grams), man. YOM: 09/2005 dimi controls, 20.08" x 22.44" (570 mm x 790 mm) tie bar spacing, 31.89" x 34.25" (870 mm…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2007 Clamp Force (t): 50 Screw Diameter (mm): 30 Max Sh…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Data sheet Brand: ARBURG Model: 420 C 1000-150 / 150/60 Tonnage: 100 Year: 2001 Column passage: 420X420 Screw diameter: 35mm -25mm -22mm Calcu…

Injection Unit C110 Screw Diameter 25 mm Shot Size 1.7 oz Max Injection Pressure 30,780 Tie Bar Spacing 14.17" x 16.14" Mold Open Stro…

Model: HTF 360X Screw Diameter (MM): 65 Tie Bar H X V (MM): 710 x 710 Clamp (ton): 360 Year: 2004 Shot Weight (Gram): 972 Size (L X W X H) (MM…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

Model: Q75HM8EE01 Screw Diameter (MM): 67 Tie Bar H X V (MM): 680 x 580 Clamp (ton): 300 Year: 2008 Shot Weight (Gram): 987 Size (L X W X H) (…

Model: HTF250X Screw Diameter (MM): 50 Tie Bar H X V (MM): 570 x 570 Clamp (ton): 250 Year: 2006 Shot Weight (Gram): 442 Size (L X W X H) (MM)…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

Brand:BMB Model:MC 350 Tonnage:350 Year:2001 Clearence between tie-bars:900x630 Screw diameter:70 Calculated shot volume:1300 cm3 Min/Max moul…

Horizontal Injection Mold (81028) Manufactured 2011 Specifications Features Shot Size: 8.7 oz. Tie Bar Spacing: 22.05" x 20.08" Platen Size: …

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Horizontal Injection Mold (81029) Manufactured 2006 Specifications Features Shot Size: 30.2 oz Tie Bar Spacing: 26.97" x 25" Platen Size: 37.…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…