Straightener 18

-Capacity: 0.125" - 1.125" Diameter -Minimum Length of Cut: 0.750" -Maximum Length of Cut: Limited by Length of Runout Table -Cutoff: Standard Bur…

Coil Width: 20" (500 mm) Maximum Thickness: 0.118" Steel 0.157" Aluminum Number of Feed-In Rolls: 2 Number of Straightening Rolls: 9 Roll Diamet…

sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: 5,0 mm Payload: 12,0 to (Coil) band speed: 4,5 / 25 m/min work he…

reel Coil weight / load capacity 10 t Belt width 150 - 1200 mm Coil outer diameter 800 - 1,500 mm Spreading range 470 - 520 mm Dimensions LxWxH …

Tube Straightener and Cut-Off Machine Capacity: 0.187" Dia. Max. Entry Powered Feed Rolls Reverse Plane 18 Roll Straightener with Sizing 2nd Se…

Material width 2500 mm Material thickness 3 - 16 mm Number of straightening rollers 5 Straightening roller diameter 160 mm Straightening roller b…

Decoiler for coils up to 1500 mm Straightner with 9 rolls adjustaable to 0.2 - 2 mm Slitting roll with 3 knive blades Cutting plate shear up to 2…

Feeding straightener. Sheet metal strip width up to 1,300 mm. Max sheet thickness 0.8 - 3mm. Max. sheet metal cross-section 2,000 mm2. Unwinding spee…

Sheet metal leveler 500 mm and 6 mm thick width 500mm Maximum sheet thickness 6 mm Speed of 0-20 meters/minute. Motor power 12.5 hp 380 volts III…

Sheet straightening machine, used, sheet leveler, used, Typ / type: UBR 10 x 2000 / 1-16 Manufacturer / make: WMW Gotha Max. Sheet width / max.…

Type: MD6-RE60.1300 Producer: LC CATTANEO Made in: 2014 Characteristic: Maximum width of the sheet metal: 1300 mm Maximum thickness of the she…

It is a team made up of a Galdabini cnc shaft straightening press, 2 center point grinders, a Fanuc robot and a roller line with trays for automatic …

technical data: strip thickness 0,8 – 3,0 mm strip width max. 1.600 mm No. of work rolls 21 St./No. work rolls-Ø 60 mm width of work rolls 1.72…

Wire diameter - min.: 4 mm wire diameter - max.: 12 mm wire length: variable mm control: Macsoft total power requirement: ca. 10 kWh

YEAR: 1985 Red Bud Straightener/Edge Trimmer -Peeler Table: Attached to Straightener -Straightener / Edge Trimmer Unit: 60" x 0.135" Capac…

# 0908 PRESS-GIKEN JAPAN D'COILER STRAIGHTNER FEEDER …

Straightener, straightener, VEB BLEMA GOTHA UBR 20X1600 / 1-10 sheet rolling machine. Machine for straightening sheets up to 20 mm thick and up to 16…

Maximum length of the sheet metal: 2500 mm Maximum thickness of the cut sheet metal: 1.2 mm