Listings similar to "(1996) 120 Ton, Mitsubishi" 60

State-of-the-Art Krauss Maffei KM100-180-180 CXV 2-Shot Injection Molding Machine with Robot Elevate your manufacturing capabilities with the Krau…

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

Tie Bar Distance :860×860mm Screw Diameter :80mm Theoretical injection capacity : 1880㎝3 Injection mass (polystyrene) :173g (polyethylene) : 137…

Euromap classification: 2500-450 Closing Power: 45o Ton Year of Manufacture: 1991 Power: 83 kW Weight: 22,500 kg The press has always worked ver…

TONNAGE: 150 SHOT SIZE: 9 oz. MAX CLAMPING STROKE: 12.1” TIE BAR DIAMETER: 2.75” SPACE BETWEEN TIE BAR: 16” x 16” PLATEN SIZE: 24” x 24” …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Model: ve210-960, 15.3 oz (435 grams), man. YOM: 09/2005 dimi controls, 20.08" x 22.44" (570 mm x 790 mm) tie bar spacing, 31.89" x 34.25" (870 mm…

GENERAL SPECIFICATIONS YEAR 2005 BRAND ENGEL TIEBARLESS TONNAGE 65 TON SHOT SIZE 3.2 oz. MODEL NUMBER VC200/65 TECH TYPE HORIZONTAL MACHINE NO…

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used …

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Injection Unit C110 Screw Diameter 25 mm Shot Size 1.7 oz Max Injection Pressure 30,780 Tie Bar Spacing 14.17" x 16.14" Mold Open Stro…

Used 245 Ton JSW J245EII Injection Molding Machine Brand JSW Model J245EII Year of Mfg 1995 Shot Size 17.8 oz Platen Size 33.1" x 33.1" Tie B…

Used 720 Ton Toshiba ISGT720S10-B59 Injection Molding Machine Brand Toshiba Model ISGT720S10-B59 Year of Mfg 1996 Screw Diameter 105 mm Shot S…

Used 300 Ton Cincinnati Milacron VT-300-21 Injection Molding Machine Brand Cincinnati Milacron Model VT-300-21 Year of Mfg 1995 Shot Size 21 oz…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

Used 165 Ton Cincinnati Milacron VT165 Injection Molding Machine Brand Cincinnati Milacron Model VT165 Year of Mfg 1996 Shot Size 5 oz Clamp S…

GENERAL SPECIFICATIONS YEAR 1995 BRAND NISSEI TONNAGE 720 TON (PH660) SHOT SIZE 168 oz. MODEL NUMBER PH660S420B TYPE HORIZONTAL TECHNICAL SPEC…

TONNAGE: 150 SHOT SIZE: 9 oz. MAX CLAMPING STROKE: 12.1” TIE BAR DIAMETER: 2.75” SPACE BETWEEN TIE BAR: 16” x 16” PLATEN SIZE: 24” x 24” …

Model: FT 110 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 X 340 Clamp (ton): 110 Year: 1996 Shot Weight (gram): NA PLC Model/ Controller: P…

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

Used 210 Ton Mitsubishi 190MS3-15 Injection Molding Machine Brand Mitsubishi Model 190MS3-15 Year of Mfg 1995 Shot Size 16.3 oz Screw Diameter…

For Sale used injection moulding machine Manufacturer: JSW Model: E 650 Year of manufacture: 1992 Clamping force: 650 Tn Running Condition

Clamp Force 85 Tons Clamp Stroke Max 11.81" Tie Bar Spacing 14.17" x 14.17" Mold Thickness (min-max) 7.09" – 13.78" Daylight 25.59" In…

Brand Cincinnati Milacron Model VSX 85 Year of Mfg 1997 Shot Size 2.97 oz Screw Diameter 32mm Tie Bar Spacing 15.94" x 14.17" Mold Thickness (m…

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total pro…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…

Description Van Dorn DEMAG Model 400-HT-45-0507 (400) Ton Injection Molding Machine – Year of manufacture- 1997 – Clamp force- 400 US tons …