2000 Ton Mdl Fmdp1-2000S Kawasaki Hydraulic Press

Listing description

Used 2000 ton Hydraulic press for FRP products (Fiber Reinforced Plastic)
Make:Kawasaki(Japan)
Manufacturing year: 1989
Capacity: 2000 ton
Usages:FRP products
Model: FMDP1-2000S
Pre-pressing capacity: 667 ton
Pressure adjustment range:51.4~257ton
Upward capacity: 150ton
Stroke: 2000mm
Die height(Daylight): 3100mm
Slide: 5000 x 3000mm
Bolster: 5000 x 3000mm
Upright distance: 5500mm
Slide max. down speed: 250mm/s
Upward speed: 150mm/s
Pre-pressing seed: 34~8mm/s
Pressing speed: 8~0.5mm/s
Deep drawing speed(H.P): 34mm/s(467ton)~25mm/s(667ton)
Deep drawing speed(L.P): 11mm/s(1400ton)~8mm/s(2000ton)
Main hydraulic pump: 1unit( 559L/min x 257kg/cm2 x 1150rpm)
Levelling pump: 31.2L/min x 210kg/cm2x1750rpm
39.2L/min x 115kg/cm2 x 1750rpm
Pressing maintain pump: 1unit(82L/min x 309kgcm2 x1750rpm)
Auxiliary pump: 69.5L/min x 20kg/cm2x1150rpm(for servo)
41.3L/min x 60kg/cm2x1150rpm(for pilot)
Ejection pump: 68.4L/min x 0kg/cm2x1750rpm
51.3L/min x 249kg/cm2x1750rpm
Main motor: 1unit(190kW x420V)
Motor for levelling pump: 18.5kW x420V
Motor for auxiliary pump: 11kW x420V
Motor for ejection pump: 18.5kW x420V
(Slide levelling equipment)
Capacity: 100ton x 4units
Pressure: 210kg/cm2
Max. stroke: 99.99mm
Real stroke: 90mm
Lift: 90mm
(Die cushion)
Capacity: 100~500ton
Pressure: 49~245kg/cm2
Max. stroke: 350mm
Pad size: 4290mm x2040mm
Ejection capacity: 50ton/ 249kg/cm2
Upward speed: 40mm/s
Downward speed: 25mm/s

This equipment is located in US