22”x16”x16” Used Acra APC-S560A CNC Swing Table Production Centers with FANUC OM Price drop

Listing description

ACRA’s 22 in x 16 in x 16 in Used APC-S560A CNC Production Centers are Fast and Precise Vertical Machining Centers with 180° Auto Pallet Changer (Swing Table), High Speed, and Ultra Quick Tool Changer. Built on a rugged frame with quality craftsmanship, this machine is ideally suited for multiple part set up and high production Of accurate Milling, Boring, and Drill/Tap operations. Accuracy, speed, and reliability are achieved by the combination of widely spaced and double anchored linear Guide Rails aboard ribbed Meehanite Casting; Direct Coupled Spindle Motor; Ultra Quick Arm Type Tool Changer; and Single Source and Matched Control, AC Servo and Spindle Motors, and Digital Drives.

STANDARD ACCESSORIES:
• 180º Swivel Table, 5 ±1 Sec Index
• MPG Handwheel
• FANUC Control
• Full Enclosure
• 1.25 Sec Tool Change
• Worklight
• 16 Arm Type Tool Changer
• Pilot Lamp
• BT-40
• Coolant System
• Rigid Tap To Tool Changer
• Heat Exchanger For NC Cabinet
• Rigid Tap To 5,500 RPM
• Patented X-Axis Gull-Wing Cover
• Chip Flush System
• Floating Counter Balance
• Internal Chip Auger
• Manuals
• Patented Oil Chiller System
• Toolbox
• Auto Way Lube

CONTROLLER FUNCTIONS:
• Up To 4 Axes Simultaneous Tool
• Number Commands- T And 2 Digits
• Minimum Input 0.001 mm or 0.0001 in
• Tool Diameter Compensation - G41, G42, G40 Cancel
• Spindle Speed Command S-5 Digits
• Tool Length Compensation - G43, G44, G49 Cancel
• Spindle Speed Override In 50~120%
• Tape/Code Input - ISO/EIA Auto Recognition, RS-232
• Rigid Tap
• Tape Mode/DNC Function
• Rapid, Linear, Circular Feed-G0,G1,G2,G3
• Inch/Metric Conversion - G20, G21
• FeedRate Ovenide In 0~150% Increments
• Skip Function G32 (Optional)
• Dwell Stop - G4 P Or X
• Workpiece Coordinates - G54~G59 6 Sets
• Return To Home - G27, G28, G29, G30
• Local Coordinate System Setting G52
• Manual Pulse Generator With Detente - 0.0001, 0.001, 0.01
• Stored Programs - 99
• Minor Image
• Jog Feed 0~393 IPM
• Incremental, Absolute - G91, G90
• Rapid Overide 1%, 25%, 50%, 100%
• Canned Cycles - G73~76, G80~89

SPECIFICATIONS

TABLE
Index Time: 5 SEC
Table Overall Size: 23.6 in x 15.75 in x 3.34 in
T Slots (No./ Pitch): 4 / 0.625 in
Max. Table Load: 220LBS x 2
Height From Floor: 32.28 in

TRAVEL
X Axis: 22 in
Y Axis: 16 in
Z Axis: 16 in
Spindle To Column: 18.62 in
Spindle To Table: 5.9 in to 22 in

SPINDLE
Type: Direct Coupled Cartridge
Taper: BT-40 (CT Opt.)
RPM: 8000 (12000 Opt.)
Rigid Tap: Up to 5500 RPM
Motor: 10 HP
Patented Oil Chiller System: Std.

FEED RATES
Rapid X, Y: 1890 IPM
Rapid Z: 1890 IPM
Cutting Feed Rate: 0.04 ~ 394 IPM

ACCURACIES
Positioning: 0.0002 in / 12 in
Repeatability: ± 0.0001 in
Table Repeatability: ± 0.0004 in

AUTOMATIC TOOL CHANGER
Index Time (Tool/Tool): 1.25 SEC
Index Time (Chip/Chip): 2.5 SEC
No. Of Tools: 16 (24 Opt.)
Type Tool Changer: Arm, Side Mount
Max Tool Dia.: 3.94 in
Adjacent Tool Max Dia.: 3.15 in

MOTORS
X/Y/Z Motor: 1.34 Hp (1.88 HP FANUC)
Coolant: 0.5 HP

OVERVIEW
Net Weight: 12,000 LBS
Footprint: 116 in x 74 in x 102 in
Shipping Dims: 124 in x 91 in x 108 in

This equipment is located in TW