APS / DDM Novastar L-60 / L60/ L 60 Automated Pick and Place System
This is a low hour/low board count L60 machine that was used in a prototyping facility. There is minimal to no wear on any components. The machine is clean, and currently operating. All options are installed, including camera system and fluid dispensing system. There are a total of 29 feeders, including a vibratory feeder. (4 feeders are marked with issues). Computer is completely operational, and system passes all self checks. Five different pick nozzles are included. Pictures are below, along with a link to a video of this actual machine in a demonstration operation (taken in Feb 16). DDM Novastar shows this machine as up to date in their system, and provides 24/7 technical support for the life of the machine for a single $3600 transfer fee (no future licensing or maintenance contract fees!).
A brief video showing this actual machine operating in a demonstration can be found below. In this video, we show that the machine is operating without stopping, which indicates that it is free of errors or problems. There are no parts currently loaded in the feeders or solder paste loaded in the dispenser, as we are trying to keep the machine as clean as possible at this time.
Placement rates up to 4800 cph
Accommodates board widths up to 13.5" x 32"
Placement accuracy to 0.001"
Vision system with fiducial correction, on-board dual function camera/computer color monitor
Flexible feeder set-up allows easy interchange of electro-optical SmartCountTM tape, feeders
On-the-fly component centering or optional touchless Cyberoptics® laser centering
Resolution of 0.0000787" (2 microns) and accuracy to 0.001. Accurately places virtually all SMT components including discretes, SOICs, PLCCs, QFPs, and BGAs
Capable of placing fine pitch components as low as 15 mil (0.381mm) and 0201s*
Interchangeable tape, tube, bulk or tray feeders
Fully self-contained all electric system. No shop air required
Friendly, easy to use Windows® based software
Automatic 4-position nozzle changer
Optional CAD transfer software.
Software for panelized boards
Accessible, unobstructed work plateau for operator
Heavy, welded, steel frame construction
Full interlock system for operator safety
Optional convenient SuperStripTM feeders for short tape strips
Optional fluid dispenser
Machine is serviceable, and can be seen in person, if desired.
It is currently powered, and capable of running.
This is very large, and will need to go by truck freight, or by your vehicle.
I can help with making arrangements, but it is not crated or palletized at this time.
There will be additional costs for us to make it ready for transport.
Use the freight calculators to get the actual transport charges, not the total shipping cost.
58" x 58" x 60"
Listing of removable fixtures:
19x - 8mm feeders (+3 more that are marked bad)
4x - 12mm feeders
2x 16mm feeders (+1 more that is marked bad)
1x vibratory feeder (can put several chip tubes in it)
5x 16mm stationary chip holders
1x 24mm (with 4 separate slots) stationary chip holder
3x DIP700 chip holders
2 sets of board racks
1x 4 position tool holder (5 total pick up tools)