Listings similar to "Arburg 220 S 250 - 60 Injection moulding machine" 60

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Data sheet Brand: ARBURG Model: 570 C 2000-675 / 350 Tonnage: 200 Year: 2001 Column passage: 570 x 570 Screw diameter: a: 45 b: 35 Calculated …

Tie Bar Distance :410×410mm Screw Diameter :40mm Theoretical injection capacity : 176㎝3 Injection mass :160g Maximum injection pressure: 157Mpa …

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2007 Clamp Force (t): 50 Screw Diameter (mm): 30 Max Sh…

Model : Allrounder Centex 570 C 2000 - 350/150 clamping force 200 ton srew diameter 35 mm srew diameter 15 mm distance between the clamping plate…

Mould opening/closing, injection, ejection, etc. are fine and smooth. There is backflow as a problem. It is not known whether it is possible to r…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 …

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 m…

Data sheet Brand: ARBURG Model: 420 C 1000-150 / 150/60 Tonnage: 100 Year: 2001 Column passage: 420X420 Screw diameter: 35mm -25mm -22mm Calcu…

Clamping force: 320 t Year: 2015 Shot capacity: 826 g Injection Unit: .../1300 Screw diameter: 70 mm Injection pressure: 1470 bar Injection v…

Condition: Refurbished with guarantee Clamp Force (t): 70 Screw Diameter (mm): 40 Max Shot Weight (PS) (g): 158 Control System: Selogica Lead Ti…

ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought i…

clamping force : 100 tons working hours : 66 000 h screw diameter : 35 mm Shot weight max : 144 cm3 Max pressure at screw end :1820 bar Machine …

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 25 Screw Diameter (mm): 25 Max Shot Weight (P…

Arburg 720S 3200 - 800/350 Year: 2007 Injection unit: ... / 800-350 Screw diameter: 35/35 mm Injection volume: 139/139 ccm Shot weight: 131/13…

Arburg 520C 1500 800 injection molding machine year 2005 Can be seen upstream

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Manufacturer: Arburg Model: 270S 250-60 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 25 S…

Year : 2007 Injection Unit : .../800-350 Screw diameter : 35 / 35 mm Injection volume : 139 / 139 ccm Shot capacity : 131 / 131 g Clamping U…

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…

INJECTION UNIT Screw diameter: mm Calculated injection volume: cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on the mate…

Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004

INJECTION UNIT Screw diameter: 25 mm Calculated injection volume: 49 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 88 cm³/s Pressure…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Pressure on the material: 2380 bars CLOSING UNIT Closing force: 2500 k…

Model: AUTOMODEL-FU CHUN SHIN Screw Diameter (MM): T04260 Tie Bar H X V (MM): 28 Clamp (ton): 350 X 300 Year: 1998 PLC Model/ Controller: AUTOMO…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Arburg 570C 2000 - 150/150 Year: 2006 Injection unit: ... / 150-150 Screw diameter: 30/30 mm Injection volume: 77/77 ccm Shot weight: 72/72 …