Listings similar to "Arburg - 221-75-350 Injection moulding machine" 60

Arburg Bimaterial of 100 tons of force in the closure. 79,115 working hours. The machine is delivered completely reconditioned by our team and in per…

Year : 2007 Injection Unit : .../800-350 Screw diameter : 35 / 35 mm Injection volume : 139 / 139 ccm Shot capacity : 131 / 131 g Clamping U…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 144 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

ARBURG 250T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the …

ARBURG 400 tons " clean room machine " Extras: Accumulator, 2 core-pullers, 3 pneumatic air-valves, 8 hot runner zones. Only 42.300 working hours…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Clamping force 100 t Srew 40 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 188 ccm Control Mu…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Pressure on the material: 2380 bars CLOSING UNIT Closing force: 2500 k…

Arburg 570C 2000 - 150/150 Year: 2006 Injection unit: ... / 150-150 Screw diameter: 30/30 mm Injection volume: 77/77 ccm Shot weight: 72/72 …

1994 BMB Model KW650/5500 600 Ton Injection Molding Machine – Shot size- 2000 grams – Screw diameter- 90 mm – Injection pressure- maximum…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

IMM ARBURG 320 tons clamping force. year 10/ 2008, 1st installation 2009, working hours approx. 57.000, diam. screw diam. 70 mm, 2 core-pullers, euro…

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 23.3 L/D Maximum injection rate: 112 cm³/s Pres…

Controller HMI LCD Retro Fit Corepull 1 on moving platen and 1 on stationary platen Air Blow 5 on moving platen and 5 on stationary platen R…

Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 23.3 L/D Maximum injection rate: 144 cm³/s Pres…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 139 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure o…

Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 k…

TONNAGE: 30 Tons SHOT SIZE: 3 oz. CLAMP STROKE: 6" OPEN DAYLIGHT: 14.8" MOLD DIM.: 12" x 7 3/4" 2 STATION SHUTTLE TABLE: 34" x 7 3/4" UPP…

Type: 270 S 250 - 60 Year of manufacture: 1997 Control type: Selogica Closing system: Hydraulic TECHNICAL DATA Closing force: 250 kN Clearanc…

Machine comes with robot Power : 50 Ton Distance between columns: 320x320 Screw diameter: 30 Calculated injection volume: 70 Min / Max mold thic…

1992 Cincinnati Milacron Model VH500 (500) Ton Injection Molding Machine Shot Size- 54 oz. Clamp- hydraulic Platen dimensions- 48” x 48…

Used 770 Ton Van Dorn 770H-RS-165F Injection Molding Machine Brand Van Dorn Model 770H-RS-165F Year of Mfg 1994 Shot Size 165 oz Tie Bar Spaci…

240 Ton Arburg Injection Mold Machine Shot Size: 11.89 oz. Tie Bar Spacing: 22.44" x 22.44" Platen Size: 31.29" x 31.29" Daylight: 37.40" Clamp …

Description 1994 BMB Model KW650/5500 600 Ton Injection Molding Machine – Shot size- 2000 grams – Screw diameter- 90 mm – Injection pr…

Used 245 Ton JSW J245E Injection Molding Machine Brand JSW Model J245E Year of Mfg 1994 Screw Diameter 58mm Shot Size 17.8 oz Platen Size 33.…

Model 370c 600-100, 2 oz (58 grams), dialogic controls, 14.57" x 14.57" (370 mm x 370 mm) tie bar spacing, 29.53" (750 mm)max. daylight, 21.46" x 21…

Used 39 ton Arburg injection molder, type All Rounder, model 220-90-350, with control panel with Sterlco mold temperature controllers

Used 17 Ton Arburg 220 S Injection Molding Machine

Used Arburg All Rounder injection molding machine. Model 221-55-250 New 1982. Has 1.45 ounce shot. Unit has 25 ton clamping capacity. Clamp frame has…