Listings similar to "Arburg - 320M 500-210" 60

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 392 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 25 mm Calculated injection volume: 49 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 88 cm³/s Pressure…

Arburg Bimaterial of 100 tons of force in the closure. 79,115 working hours. The machine is delivered completely reconditioned by our team and in per…

Year : 2007 Injection Unit : .../800-350 Screw diameter : 35 / 35 mm Injection volume : 139 / 139 ccm Shot capacity : 131 / 131 g Clamping U…

INJECTION UNIT Screw diameter: mm Calculated injection volume: cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on the mate…

Clamping force 100 t Srew 40 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 188 ccm Control Mu…

ARBURG 400 tons " clean room machine " Extras: Accumulator, 2 core-pullers, 3 pneumatic air-valves, 8 hot runner zones. Only 42.300 working hours…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Pressure on the material: 2380 bars CLOSING UNIT Closing force: 2500 k…

Arburg 570C 2000 - 150/150 Year: 2006 Injection unit: ... / 150-150 Screw diameter: 30/30 mm Injection volume: 77/77 ccm Shot weight: 72/72 …

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

ARBURG 250T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the …

IMM ARBURG 320 tons clamping force. year 10/ 2008, 1st installation 2009, working hours approx. 57.000, diam. screw diam. 70 mm, 2 core-pullers, euro…

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 23.3 L/D Maximum injection rate: 144 cm³/s Pres…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 139 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure o…

Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 k…

Used Arburg Model 720H 3200 2100 hydraulic injection molder. 38.74 oz (984 gr PS), 70mm screw OD. New 2011. Tie Bar Clearance: 720mm x 720mm. Clam…

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 106 cm³ Length/diameter ratio: 23.3 L/D Maximum injection rate: 112 cm³/s Pres…

TONNAGE: 30 Tons SHOT SIZE: 3 oz. CLAMP STROKE: 6" OPEN DAYLIGHT: 14.8" MOLD DIM.: 12" x 7 3/4" 2 STATION SHUTTLE TABLE: 34" x 7 3/4" UPP…

Controller HMI LCD Retro Fit Corepull 1 on moving platen and 1 on stationary platen Air Blow 5 on moving platen and 5 on stationary platen R…

Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004

Brand Arburg Model 520 E 1500-400 Year of Mfg 2016 Tonnage 165 Screw Diameter 40 mm Shot Size 6.49 oz Max Hours ~30,0…

Machine comes with robot Power : 50 Ton Distance between columns: 320x320 Screw diameter: 30 Calculated injection volume: 70 Min / Max mold thic…

1992 Cincinnati Milacron Model VH500 (500) Ton Injection Molding Machine Shot Size- 54 oz. Clamp- hydraulic Platen dimensions- 48” x 48…

240 Ton Arburg Injection Mold Machine Shot Size: 11.89 oz. Tie Bar Spacing: 22.44" x 22.44" Platen Size: 31.29" x 31.29" Daylight: 37.40" Clamp …

Type: 270 S 250 - 60 Year of manufacture: 1997 Control type: Selogica Closing system: Hydraulic TECHNICAL DATA Closing force: 250 kN Clearanc…

Model 370c 600-100, 2 oz (58 grams), dialogic controls, 14.57" x 14.57" (370 mm x 370 mm) tie bar spacing, 29.53" (750 mm)max. daylight, 21.46" x 21…

Used 39 ton Arburg injection molder, type All Rounder, model 220-90-350, with control panel with Sterlco mold temperature controllers

Used 17 Ton Arburg 220 S Injection Molding Machine

Used Arburg All Rounder injection molding machine. Model 221-55-250 New 1982. Has 1.45 ounce shot. Unit has 25 ton clamping capacity. Clamp frame has…