Listings similar to "ASM Siplace pick and place machine in new condition" 60

FOR SALE used Kayo S600 pick & place machine. Only couple years old. Condition like new. READY TO USE Included (can see in photos as well): 1.…

Universal Instruments AdVantis XS Multi-Function Pick and Place Machine -Model 4985A -Linear Motor VRM Technology Positioning Gantry System -1 …

Universal Instruments AdVantisX Lightning Placement Machine AC-30S -Low Cycles and Very Clean -Model 4993C -Single Beam 30 Spindle HSC Lightnin…

Universal Instruments Genesis GI-14D Multi-Function Dual Beam Placement -Machine 4988C -33,800 Max CPH -Very Clean and Well Maintained -FlexJ…

FUJI NXT 4M Base - 2 x M6 module Year: 2005 4M Base SN 1480 Head types: H04 and H01 Hours: ~13050 hours Dual Lane Bucket type Left to Right A…

Panasonic CM602-L Modular High Speed Placement Machine Brand: Panasonic Model: CM602-L Year: 2014 3 configurations available Type A-2: (4) 12…

Universal Instruments Fuzion XC2-60, Dual Beam, Dual Lightning Head High Speed Placement Machine -65,500 Max Placement Rate CPH -Model 4997A XC Hi…

- Machine type : Chip shooter - Manufacturing year : 2011 - The number of spindles : 6 placement spindles x 2 Gantries - CPH (Optimal) : 46,000 -…

Samsung DECAN F2 high speed wide range placers adopts modular conveyors, (shuttle ↔ dual) applied with a modular conveyor to optimize PCB transportat…

- Manufacture: Yamaha - Model: YSM20-2 - Machine type: Pick and placer - Manufacturing year: 2017 - Conveyor: Single lane - Head typ…

Manufacture: Fuji Model: AIMEX IIIC Manufacturing year: 2016 Head: DX head with R12 and R4 nozzles Single robot LTW2 tray unit included Conditi…

Available is a low hours iPulse M20 machine, vintage 2017. Total hours below 6000. Comes with 2 trolleys. Feeders also available for extra cost. Ma…

SMT Placer with 4 gantries 4 x 12x DLM3 (Collect & Place) max. placement rate up to 80.000 cph Component range 0402 - 18,7 x 18,7 mm Nozzle cha…

The Yamaha MG-1R is a flexible placement machine, manufactured in 2008. This machine is designed for precision and flexibility in electronic manufact…

- Manufacture: Samsung Techwin (Hanhwa) - Model and Type: SM451 flexible mounter (odd shaped component placer) - Manufacturing year: 2014 - CPH: 8…

JUKI KE-3020VAL High Speed Chip Mounter Board Size L-Wide Size (510×360mm) *1 ○ L Size (410mm×360mm) ○ L-Wide sSize (510×360mm) *1 ○ XL Siz…

Status: Good working condition SIPLACE SX2 Placement speed** 86,500 cph Placement speed(IPC) 66,000 cph Feeder capacity 120 x 8mm slots C…

Machine is from September 2005 It has 2x FES at front side, machine has fixed feederbar at rear side Incl 50x feeder + 2x FES 24 cart Machine is …

3 Ipulse M1 as follows: - Ipulse M1 plus - year 2003 - in best condition - Ipulse M1 plus - year 2003 - in best condition - Ipulse M1 - year 2002 - t…

YS12F+ATS Vintage:2016 With one ATS(IC Tower) With one nozzle station With one fixed camera

Juki KE-2050, YM 2004, 39537 running hour Juki KE-2060, YM 2004, 40440 running hours 4 trolleys plus one extra Feeders: about 100pcs 8mm (…

head: CP20A*4 , X table*4 , Single Lane CP20A/CPK1.7 Vintage:2008 All are in good condition and fully function.

SMT High-Speed-Placer with 3 gantries 1x 6x DLM3 (Collect & Place) and 2 x Twin (Pick & Place) module max. placement rate up to 16.800 cp/h IPC Com…

Status: Good working condition UKI long substrate high speed SMT machine JX-350 specifications Substrate size one-pass 650x360mm Double transf…

Siemens Siplace HF3 Pick and Place Vintage: 2005 Siemens HF3 With MTC2 Tray H12 x 2 + TH x 1 Software Version: 505.05 Fully reconditioned an…

Machine in great working condition. Will be available in Q2/Q3. Feeders etc can be bought with the package. Additional information based on req…

TR6SNR tray changer, additional HRC camera, 3 trolleys, approx. 85 original feeders (purchased in the set, additional 25 feeders for parts and regene…

IPulse M6 Operating hours: 6402 hours Statutory components: 21,649,312 units Feeder: not included in the price, can be bought as an option.

Status: Good Working Condition Vintage: 2016 4 x CP20A heads Machine Version: 707.1SP2 Machine system: Win 7 Machine Type SIPLACE SX4 Gantr…

Status: Good working condition Model FUJI XPF-W PCB size L50mm x W50mm to L686mm x W508mm PCB Thickness 0.4–6.5mm Auto-Tool Revover Aut…