AVIA VMC 1300 Machining center - vertical

Listing description

The AVIA VMC 1300 vertical milling center was built in 2012.

Technical parameters of the AVIA VMC-1300 machining center

- CNC control: SIEMENS 828D
- drives and motors: SIEMENS

Horizontal table:
- mounting surface on a horizontal table: 1500 x 710 mm
- number of T-slots: width x spacing: 5 x 18 x 125 mm
- maximum weight of the workpiece: 1500 kg

Spindle:
- type: cartridge
- tool holders: ISO 40 according to PN-92 / M-55085/01 (DIN 69871A)
- mounting mushroom: ISO 7388/2 type B
- maximum distance between the spindle front and the table: 100 mm
- minimum distance between the spindle front and the table: 770 mm
- revolutions: 50-10000 rpm.
- engine power (S6-25%, 10 min work cycle): 32 kW
- engine power continuous operation: 15 kW

Tool magazine:
- number of tools: 40 pcs.
- maximum tool diameter: 85 mm
- maximum tool length: 300 mm
- maximum tool weight: 7 kg
- tool change time: 2.8 s

Axes shifts:
- longitudinal X: 1300 mm
- transverse Y: 700 mm
- vertical Z: 670 mm

Rapid feeds in the X, Y, Z axes: 30/30/30 m / min.

Accuracy (according to ISO 230-2):
- positioning accuracy: + -0.005 mm
- positioning repeatability: 0.005 mm

Overall dimensions in millimeters:
- length x width x height: 4300 x 3000 x 3250 mm
- transport dimensions: 2290 x 3150 x 2865 mm

Compressed air requirement:
- network pressure: 0.6 MPa
- expenditure: 0.2 m3 / min.
- air quality: class 5 according to DIN ISO 8573-1

Other machine data:
- coolant tank capacity: ~ 700 liters
- front door opening width: 1395 mm
- installation data: 3x400V / 50Hz / 40kVA
- chip conveyor: screw type
- weight of the AVIA VMC 1300 CNC milling machine: approx. 9600 kg

This equipment is located in PL