Baileigh Bender RDB-300

Listing description

Specifications

Standard Features
Programmable electric tubing bender
Maximum capacity is 2 inch Schedule 40 pipe, 2 inch square tubing, 2-1/2 inch
tube
Lease this model pipe bender call for details.
To program a bend, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head will automatically stop at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends
Like most RDB tubing benders, the model 300 utilizes a portable cart with wheels for easy mobilization around the job site or production floor.
The maximum center line radius on the Model 300 is 12 inches, while the 300 with OCS is 15 inches
The maximum bend degree is 206
Required power is 220V, single phase, 60 hertz
Optional OCS (operator control station) programming unit can store multiple programs. Each program can store 10 different bend angles. The model 300-S tube bender with OCS was designed to be understood easily for ease of operation.
Like all RDB tube benders, bends can be advanced after stopping machine, saving on material costs during set-up.
Non-proprietary center die spindle allows for custom tooling applications.
Bend material: Round or square tubing, pipe, flat stock, angle iron, or solid rod.
This tubing bender is supplied with an AC variable speed motor drive with built in speed potentiometer.
Similar to other RDB programmable tube benders, the Model 300 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
RDB pipe benders are Made in America
For more information on the Baileigh Industrial RDB-300 Rotary Draw Pipe Bender, or any other Bailegh Pipe and Tube benders please give us a call at (800)648-6370

This equipment is located in US