Listings similar to "Battenfeld TM 100/525 Injection moulding machine" 60

Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 4…

Make : SM 250 TS Clamping Unit : 250 Ton Control : Keba Screw Dia : 52 mm Year : 2007 Shot Size (Theoretical) cm³ - 425 (PP) Inject…

Tie Bar Distance :460×460mm Screw Diameter :40mm Theoretical injection capacity : 200㎝3 Injection mass :190g Maximum injection pressure: 190.8Mpa…

Tie Bar Distance :610×610mm Screw Diameter :55mm Theoretical injection capacity : 522㎝3 Injection mass :495g Maximum injection pressure: 177.2Mpa…

Make : SM 250 TS Clamping Unit : 250 Ton Control : Keba Screw Dia : 52 mm Year : 2007 Shot Size (Theoretical) cm³ - 425 (PP) Injection Weight g…

Make : FT 580 Clamping Unit : 580 Ton Control : Techmation Screw Dia : 90 mm Year : 2008 Screw L/D Ratio L/D - 20:6 Shot Size (Theoretical) cm³…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2007 Clamp Force (t): 50 Screw Diameter (mm): 30 Max Sh…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2006 Clamp Force (t): 90 Screw Diameter (mm): 35 Max Sh…

- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: …

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing …

Model: ve210-960, 15.3 oz (435 grams), man. YOM: 09/2005 dimi controls, 20.08" x 22.44" (570 mm x 790 mm) tie bar spacing, 31.89" x 34.25" (870 mm…

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 m…

Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 …

Manufacturer:BATTENFELD Model:HM 1000 / 7700 Tonnage:1000 Year:2000 Clearence between tie-bars:1120 x 1400 Screw diameter:100 Calculated shot v…

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used …

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing…

Model: FT 130 / F2 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 x 400 Clamp (ton): 130 Year: 2007 PLC Model/ Controller: ZHEIJIANG (ORIGINAL)…

Made in: 2008 Characteristic: Distance Between Tie Bars: 320x320 mm Clamping force: 500 kN Weight of the injection molding machine: 2300 kg

Model: Q75HM8EE01 Screw Diameter (MM): 67 Tie Bar H X V (MM): 680 x 580 Clamp (ton): 300 Year: 2008 Shot Weight (Gram): 987 Size (L X W X H) (…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Model: HTF250X Screw Diameter (MM): 50 Tie Bar H X V (MM): 570 x 570 Clamp (ton): 250 Year: 2006 Shot Weight (Gram): 442 Size (L X W X H) (MM)…

Model: MA2000/700 Screw Diameter (MM): 40 Tie Bar H X V (MM): 530 x 530 Clamp (ton): 200 Year: 2008 Shot Weight (Gram): 253 Size (L X W X H) (…

Model: C11-BII-380EH Screw Diameter (MM): 65 Tie Bar H X V (MM): 710 x 710 Clamp (ton): 380 Year: 2008 Shot Weight (Gram): 972 Size (L X W X H…

Injection Unit C110 Screw Diameter 25 mm Shot Size 1.7 oz Max Injection Pressure 30,780 Tie Bar Spacing 14.17" x 16.14" Mold Open Stro…

Model: HTF 360X Screw Diameter (MM): 65 Tie Bar H X V (MM): 710 x 710 Clamp (ton): 360 Year: 2004 Shot Weight (Gram): 972 Size (L X W X H) (MM…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volum…

ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought i…

Arburg 720S 3200 - 800/350 Year: 2007 Injection unit: ... / 800-350 Screw diameter: 35/35 mm Injection volume: 139/139 ccm Shot weight: 131/13…