BD FACSymphony A3 Flow Cytometer

Listing description

BD FACSymphony A3 Flow Cytometer (3)Lasers/(14)Colors/(16)Detectors w/ BD FACSFlow Supply System and High Throughput Sampler - AV

Here is what you will receive:
•BD FACSymphony A3 Flow Cytometer (Made in 2021)
• Power Conditioner
• Fluidics Supply Station
• Fluidics hoses
• Pressure Vessel with holder
• Waste container
• HTS system
• Desktop PC running BD FACSDiva software ver9.1 (w/ monitor, keyboard, mouse)
• Communication and power cables

BD FACSymphony A3 Flow Cytometer System Configuration:
Flow Cytometer:
• Optics:(3) Lasers, (14) Colors, (16) Detectors:
• Forward scatter detector: Photodiode with a 488/10 bandpass (BP) filter for the 488-nm laser
• Side scatter detector: PMT with a 488/10 BP filter for the 488-nm laser
• 488nm blue laser: 780/60, 710/50, 610/20, 575/25, 530/30
• 405nm violet laser: 780/60, 710/50, 670/30, 610/20, 470/15, 431/28
• 637nm red laser: 780/60, 710/50, 670/30

Performance:
• Fluorescence sensitivity: may vary dependent on the combination of laser and filter selections
• Fluorescence resolution: coefficient of variation (CV)
• PI: Area, <3.0%, full G0 /G1 peak for PI-stained CEN
• Fluorescence linearity: doublet/singlet ratio: PI-stained CEN: 1.95–2.05 (488-nm laser)
• FSS sensitivity: sensitivity enables separation of fixed platelets from noise
• FSS resolution: scatter performance is optimized for resolving lymphocytes, monocytes and granulocytes
• SS resolution: scatter performance enables separation of 0.5-um beads from noise
• Acquisition rate: 40,000 events/second with bead

Fluidics:
• Sample flow rates three modes: RUN, STANDBY and PRIME.
• Continuously adjustable flow rate, plus three preset flow rates: LO: 12 uL/min; MED: 35 uL/min; HI: 60 uL/min

• Instrument dimensions (W x D x H) 83.8 x 76.2 x 80 cm (33 x 30 x 31.5 in)
• Weight 167.9 kg (379 lb)
• Power Operation at 100/115/230 VAC and 50 or 60 Hz

High Throughput Sampler:
• Automates and accelerates sample acquisition
• Compatible with 96- and 384-well plates
• <0.5% sample carryover in high-throughput mode

This equipment is located in US