Listings similar to "Billion HERCULE H780/140 T Injection moulding machine" 60

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Machine: BILLION HERCULE 320 T -2000 from 2006 Year: 2006 Control type: DIXIT II Number of hours: 36 800 H Closing Closing force: 320 T Openi…

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thic…

Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 50 Screw Diameter (mm): 32 Max Shot Weight (PS) (g): 86 Control System: Procan…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

Machine: BILLION HERCULE 320 T -2000 Year: 2008 Control type: DIXIT II Number of hours: 21,000 H Closing Closing force: 320 T Opening stroke:…

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Year: 2008 Type of control: DIXIT II Number of hours: 21800 Place of storage: FRANCE Timeframe: AVAILABLE Closing Closing force: 320 T Opening…

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

Clamping force : 100T Screw diameter : 35 mm Between tie bar : 445 X 445 mm Shot volume : 144 cm³ Injection pressure : 1843 Mould thickness min…

Model: FT 110 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 X 340 Clamp (ton): 110 Year: 1996 Shot Weight (gram): NA PLC Model/ Controller: P…

SANDRETTO serie 8 612/95 Clamping force : 95 T Distance between tie bar : 370 x 370 mm Mould thickness min / max : 100 - 460 mm Opening strocke :…

SANDRETTO serie 8 1334/330
 Clamping force : 330 T - 3300 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Brand : Billion Year : 1999 Type : HERCULE 3500/550 Clamping force : 550 T Screw diameter : 85 mm Between tie bar : 930 x 930 mm Sh…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

SANDRETTO series 7 1960/350 Clamping force: 350 T - 3500 KN Distance between columns: 600 x 600 mm Tray dimensions: 910 x 910 mm Min/max mold thi…

Type: KM 300-1400 C1 Producer: Krauss Maffei Made in: 2001 Characteristic: Hours on: 70.000 h Clamping force: 300 t Screw diameter: 60 mm I…

Billion H6860/900T Injection Molding Machine The machine is located in France. Year 1996 Screw diameter 105 mm

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 582 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…

Machine / Machine: BILLION 200T Bi-material Type / Type: Hercules 260/470-200 Year / Year: 2001 Command controls: DIXIT500 Number of hours / Work…

Model: AUTOMODEL-FU CHUN SHIN Screw Diameter (MM): T04260 Tie Bar H X V (MM): 28 Clamp (ton): 350 X 300 Year: 1998 PLC Model/ Controller: AUTOMO…

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke…