Listings similar to "BMB KW35PI/3450 Injection moulding machine" 60

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

INJECTION PRESS, HYDRAULICS, TON., 1000 - Used Used Sandretto MEGA T 9208/1000 Injection moulding machine

Tie Bar Distance :860×860mm Screw Diameter :80mm Theoretical injection capacity : 1880㎝3 Injection mass (polystyrene) :173g (polyethylene) : 137…

BMB 1000 T injection press Reference: 7500/1000 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 50 Screw Diameter (mm): 32 Max Shot Weight (PS) (g): 86 Control System: Procan…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Data sheet Brand: ARBURG Model: 420 C 1000-150 / 150/60 Tonnage: 100 Year: 2001 Column passage: 420X420 Screw diameter: 35mm -25mm -22mm Calcu…

GENERAL SPECIFICATIONS YEAR 2005 BRAND ENGEL TIEBARLESS TONNAGE 65 TON SHOT SIZE 3.2 oz. MODEL NUMBER VC200/65 TECH TYPE HORIZONTAL MACHINE NO…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

Brand: BMB Model: KW 35 PI / 1300 Tonnage: 350 Year: 2003 Passage Columns: 710x630 Diameter of the Screw: 60 Calculated injection volume: 705 …

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

BMB KW65 PI/5500 Injection molding machine Service in accordance with the rules. BMB service history. 2007

Brand:BMB Model:MC 350 Tonnage:350 Year:2001 Clearence between tie-bars:900x630 Screw diameter:70 Calculated shot volume:1300 cm3 Min/Max moul…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

Brand : Billion Year : 1999 Type : HERCULE 3500/550 Clamping force : 550 T Screw diameter : 85 mm Between tie bar : 930 x 930 mm Sh…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…

Type: KM 300-1400 C1 Producer: Krauss Maffei Made in: 2001 Characteristic: Hours on: 70.000 h Clamping force: 300 t Screw diameter: 60 mm I…

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total pro…

1994 BMB Model KW650/5500 600 Ton Injection Molding Machine – Shot size- 2000 grams – Screw diameter- 90 mm – Injection pressure- maximum…