Caterpillar - D6N LGP

Listing description

Construction machine
Construction type Crawler / Dozer
Operating weight 18,163 kg
Color yellow
Used yes
Output124 kW (169 hp)
Fuel type Diesel
Further information
Rental possible

For rent - price on request!
Also with Trimble laser control on request

Engine: • Water-cooled CAT six-cylinder diesel engine,
Type C7.1ACERT

Certified according to EU stage IV
Direct injection
Turbocharging
Charge air cooling (ATAAC)
Power: 124KW (168 PS) at 1,800 rpm according to ISO 9249
Cubic capacity: 7.1 l
Electric starter 24 V
Exhaust aftertreatment:
- diesel particulate filter
- urea injection
Power transmission: • Hydraulic torque converter with
Lock-up clutch
Planetary powershift transmission with
electronically programmable gears
Automatic switching
Automatic kickdown
Steering: • Differential steering with single lever operation and electronic
Feedforward
Side drives: • Planetary side drives in modular design, single reduction
Screw-on tooth segments
Electrical system: • 24 V
Three-phase alternator 105 A.
4 front and 2 rear lights
Drive: • Delta drive
Sealed and permanently lubricated sleeve chain
"System-One"
8 rollers each and 46 single-web ES track pads, 840 mm wide
Track width: 2,160 mm
Weight-bearing chain length: 3,113 mm
Full length castor protection Cab: • ROPS / FOPS cab
Soundproof
Pressure ventilation
air conditioning
Driver's seat (air suspension, heated and ventilated)
Tinted safety glass
Radio (AM / FM / AUX / USB / Bluetooth)
Dozer blade: • 6-way blade, pivotable, tiltable and angled
Blade capacity: approx. 3.87 m³
Sign width: 4,080 mm
Transport width: 3,000 mm (folding plate)
Hydraulic system: • Electro-hydraulic valve control for shield
raise / lower and tilt left / right
Load-sensing hydraulics
Electro-hydraulic valve control for differential steering
Technology • Assistance systems:
- Shield stabilization system (stable blade)
- Automatic longitudinal and lateral inclination (Slope Assist)
EMS-III (electronic monitoring system)
LCD color display (178mm diagonal) with
- Longitudinal and cross slope display (Slope Indicate)
- Urea display
- fuel gauge
- Operating hours counter
CAT fleet management:
The machine is equipped with the CAT telematics box PL641 and is in
able to GPS location, engine hours, fuel consumption and
Transferring idle / load operation via cellular network.
The scope of use (plus transmission costs) is shown separately in the
Service package agreed upon when a service package is concluded
GPS position and operating hours already included free of charge.
Operating weight: • Approx. 18 t (including ripper 19.6 t)
Standard equipment: • Engine pan protection
Tow hooks at the front and back
Lockable fuel cap
Vandalism protection • Reversing warning device
CE mark

This equipment is located in AT