CFS Tiromat 3000 / 430 Thermoforming - Form, Fill and Seal Line

Listing description

Vacuum thermoforming packaging machine CFS TIROMAT, type: Tiromat 3000 / 430 for soft film

Condition Very good, overhauled
Type of film Soft film
Upper film layer 420 - 430 mm
Lower film layer 430 mm +2/-0 mm
Feed 450 mm
Foil roll holders 3 rolls
Free insertion distance approx. 1,000 mm
Nominal suction capacity 160 cbm/h (evacuation)
Outfeed conveyor 750 mm
Machine length approx. 7 m
Electrical connection 400 V, 50 Hz
Required compressed air approx. 1,000 l/min

3 packs per cycle (433-3.1)
- 3 chambers side by side x 1 row
- Per chamber: outer dimension approx.: 450 x 134 mm, inner dimension approx.: 433 x 117 mm, drawing depth: variable 10 - 130 mm (in 5 mm increments)

4 packs per cycle (208 - 2.2)
- 2 chambers next to each other x 2 rows behind each other
- Per chamber: outer dimension approx.: 225 x 201 mm, inner dimension approx.: 208 x 184 mm, drawing depth: variable 10 - 130 mm (in 5 mm increments)

Specification:

- SIEMENS control (programmable)
- Film advance in 2 speeds (via drive motor)
- Film preheating from above (integrated in forming station)
- Evacuation and gassing via nozzle bar
- Vacuum pump BUSCH, 1 stage
- Protective bonnets with electromagnetic locking device
- Sealing and evacuating station
- 2x guillotine cross cutter with counter holder from below
- Longitudinal cutting for 2 and 3 webs
- Edge trim removal via suction unit with container
- Outfeed conveyor with cardan drive

This equipment is located in DE