Cincinnati Id/Od Cylindrical Grinder, Cincinnati Center Type Grinder, 96" Od Grinder, Cincinnati 96" Cylindrical Grinder

Listing description

26" x 96" CINCINNATI MILACRON UNIVERSAL CYLINDRICAL GRINDER
Model DE, New 1979
Stock # K15993

EQUIPPED WITH:
Vee Arc High Performance Variable Motor Drive Systems, Swing Down
Internal Grinding Attachment, Long Reach Internal Spindles, Variety
of Internal Grinding Quills, Live / Dead / Fully Variable Workhead,
Plunge and Dual Terry Grinding Cycles, 3 Work Rest,
Stainless Splash Guard.

SPECIFICATIONS:
Max. Diameter Ground................................................................ 26"
Max. Distance Between Centers................................................. 96"
Grinding Wheelhead:
Swivel Range - Lower Swivel, Right & Left............................ 90 Degrees
Upper Swivel, Right & Left..................................................... 30 Degrees
Grinding Wheels Regularly Supplied
(Diameter x Face x Hole)..................................................... 14" x 1 1/2" x 5"
Cross Feed:
Automatic Infeed at Table Reversal
(Diameter Reduction)........................................................... 0.0002" - 0.005"
Pickfeed Selections: Right End Only, Left End Only.............. Yes
Right and Left Ends............................................................... Yes
Wheelhead Movement Per Turn of Crossfeed Handwheel.... Low 0.050"
High 0.200"
Minimum Infeed Increment in Terms of
Diameter Reduction............................................................. 0.000050"
Headstock & Footstock:
Taper Hole in Headstock and Footstock Spindles................. No. 10 B & S
Range of Work Rotation Speeds
(+/- 10% Allowable Inf Var).................................................. 25-200 RPM
Headstock Swivel:
Toward Wheelhead................................................................ 90 Degrees
Away from Wheelhead........................................................... 30 Degrees
Table:
Number of Table Traverse Speeds......................................... 3 - 220 IPM
Minimum Movement Required to Reverse Table.................... 3/32"
Accuracy of Table Reversal at All Traverse Rates.................. 0.004"
Independent Right-Hand & Left-Hand Tarry Adjustment......... 0-5 Seconds
Mechanical Hand Table Traverse per Rev of Handwheel....... Rapid 15/16"
Slow. 0.2"
Power Requirements:
Wheelhead Motor.................................................................... 5 HP
Hydraulic Pump Motor............................................................. 1 1/2 HP
Headstock Motor..................................................................... 1 HP
Internal Grinding Attachment Motor......................................... 2 HP
Cutting Fluid Pump Motor........................................................ 1/4 HP
Height of Machine......................................................................... 74"
Floor to Spindle Center................................................................. 49"
Max. Distance Between Centers................................................... 96"
Overall Length............................................................................... 148"

Under Power for Inspection by Appointment.

This equipment is located in US