Clausing A40

This listing has been removed

We're sorry, but this listing is not available anymore. Here is a list of alternative listings.
Manufacturer Clausing
Model A40
Year 1995
Country USA USA
Condition Good
Main category Metalworking Machinery
Subcategory Hydraulic Press
ID P503201662

30.3'' Swing 3HP Spindle Clausing A40 DRILL PRESS;Reference Number: 148513;NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL;30.3" GEARED-HEAD, MECHANICAL CLUTCH, FLOOR;MODEL: A40;SPECIFICATIONS;Spindle taper: 4MT;Quill diameter: 3.46";Spindle travel (drilling depth): 7.87";Main motor power: 3 HP;Coolant pump motor power:.1 HP;Number of speeds: 9;Number of automatic feeds: 4;Auto feed range: in/rev..0039/.0079/.0118/.0157;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 1.57";-Maximum drilling capacity in cast iron: 2.17";-Maximum tapping capacity in steel: 1.3";-Maximum tapping capacity in cast iron: 1.57";-Automatic feed and cut-off by mechanical clutch;-Hardened and ground high quality steel gears;-Speed plate and selecting levers on front of head;-Gear box lubrication by automatic pump;-Machine base with 2 T-slots, coolant tank and pump;-Large worktable with 3 T-slots;-Feed crank wheel for manual feed;-Front hand wheel for fine feed work;-Depth scale and adjustable depth stop;-Automatic tool ejector;-Work light;-Built-in low voltage electrical equipment in machine head;-Emergency STOP;-Drill guard with microswitch;DIMENSIONS;Height: 92.4";Base: length x width: 31.9" x 21.3";Base to spindle: 49.61";Spindle center to column: 15.16";Spindle to Table;Minimum: 5.51";Maximum: 30.71";Worktable: length x width: 18.9" x 22.1";Base height: 5.31";Column diameter: 7.09";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Separate Tank Coolant System;-Work Light--Magnetic Base;-Cross Table 19.6" x 9.8";-Cross Table 27.5" x 9.8";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Pitch Control Tapping w/Braking System*;-Master Guide Spindle w/Nuts*;-Master Guide Spindle w/Nuts Special Thread (inch etc.)*;-50% Lower Feed Range*;-Mechanical Spot Face Device*;-Pneumatic Counter Balance*;-Union for Multi-Spindle Head*;-Multi-Spindle Head Guide Rod*;-7.8" Column Riser*;-Motor, 1200 RPM*;-Motor, 3600 RPM*;-Motor, 900/1800 RPM*;-Motor, 1800/3600 RPM*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

We add hundreds of new listings every week. Be sure not to miss any Clausing A40 by subscribing to our email updates.

We also send announcements for upcoming auctions for Metalworking Machinery.

We hate spam as much as you do