Clausing CL2000H

Listing description

78'' Arm 17'' Column Clausing CL2000H RADIAL DRILL;Reference Number: 149385;NEW CLAUSING RADIAL DRILL;78" ARM, 39 x 31 x 19 TABLE, 7.5 HP;MODEL: CL2000H;SPECIFICATIONS;WORKING AREA;Column Sleeve Dia.: 17";Column Face to Spindle Center;Maximum: 78.7";Minimum: 19.3";Spindle Head Travel: 59.4";Base Surface to Spindle End;Maximum: 74.8";Minimum: 19.7";Arm Vertical Travel: 43.3";Arm Rotation (Right & Left): 180 degrees;Baseplate Working Surface: 55.3" x 38.6";Box Table Area;Length: 39.3";Width: 31.5";Height: 19.7";Base Dimensions;Floor Area: 114.5" x 43.3";Height: 9.84";CAPACITIES;Drilling In Steel 2.6";In Cast Iron 2.75";Tapping In Steel 1.97";In Cast Iron 2.36";Boring In Steel 5";In Cast Iron 7.28";DRILLING HEAD;Spindle Taper: 5MT;Spindle Stroke: 14.6";Quill Diameter 3.94";Number of Spindle Speeds: 12;Spindle Speeds (rpm): 35-1890;Number of Feeds: 6;Spindle Feed Rate (in/rev.): 0.003-0.0038";Spindle Drive Motor: 7.5 hp;Elevating Motor: 3 hp;Clamping Motor: 1 hp;Coolant Pump Motor: 1/8 hp;OVERALL MEASUREMENTS;Maximum Machine Height: 124.8";Base & Column Height: 116.5";Shipping Dimensions (L x W x H): 122.2" x 55.1" x 127.5";STANDARD FEATURES & EQUIPMENT;-Equipped with hydraulic SEPARATE clamping unit. Vertical movement of the arm is coordinated by an IC Timer.;With a single touch on the push button switch, you can have arm unclamped then move vertically, or stop then clamp;automatically. Very easy to operate and tools will always stay at the same point after tool shifting.;-Gears are cooled by an oil pump to minimize gear wear.;-Friction type disc clutch absorbs impact force caused by vertical movement of spindle and protects all transmission;units inside gear-box. With quick spindle return, the clutch will help speed-up the tapping operation.;-Special automatic tool eject device is supplied to allow you to change tools quickly (No drifter is required).;-Special arm elevating device is provided to prevent arm from dropping abruptly after years of usage.;-Coolant System;-Tool kit and manuals;OPTIONAL EQUIPMENT (CALL FOR PRICING);-Large Table, 32 x 28 x 24;-Small Tilt Table, 20 x 20 x 23;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US