Clausing SX40RS

This listing has been removed


We're sorry, but this listing is not available anymore. Here is a list of alternative listings.
Manufacturer Clausing
Model SX40RS
Year 2008
Country USA USA
Condition Good
Main category Metalworking Machinery
Subcategory Precision Lathe
ID P503201241
$17,500

27.5'' Swing 3HP Spindle Clausing SX40RS DRILL PRESS;Reference Number: 148511;NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL;27.5" GEARED-HEAD, MANUAL FEED, FLOOR;w/AUTOMATIC FEED REVERSING SYSTEM FOR TAPPING;MODEL: SX40RS;SPECIFICATIONS;Spindle taper: 4MT;Quill diameter: 2.95";Spindle travel (drilling depth): 7.09";Main motor power: 3 HP;Coolant pump motor power:.1 HP;Number of speeds: 9;Number of automatic feeds: 3;Auto feed range: in/rev..0039/.0079/.0118;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 1.57";-Maximum drilling capacity in cast iron: 1.77";-Maximum tapping capacity in steel: 1.30";-Maximum tapping capacity in cast iron: 1.54";-Automatic feed reversing system for tapping;-Hardened and ground high quality steel gears;-Speed plate and selecting levers on front of head;-Gear box lubrication by automatic pump;-Machine base with 2 T-slots, coolant tank and pump;-Large worktable with 3 T-slots;-Feed crank wheel for manual feed;-Depth scale and adjustable depth stop;-Automatic tool ejector;-Work light;-Built-in low voltage electrical equipment in machine head;-Emergency STOP;-Drill guard with microswitch;DIMENSIONS;Height: 90";Base: length x width: 31.5" x 18.8";Base to spindle: 48.4";Spindle center to column: 13.78";Spindle to Table;Minimum: 1.97";Maximum: 27.2";Worktable: length x width: 18.9" x 22.05";Base height: 4.72";Column diameter: 5.91";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Separate Tank Coolant System;-Work Light--Magnetic Base;-Cross Table 11" x 7";-Cross Table 15" x 8.7";-Cross Table 19.6" x 9.8";-Cross Table 27.5" x 9.8";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Master Guide Spindle & Nuts*;-Pitch Control w/Pneumatic Rapid Approach 3.9 in/min.*;-Pitch Control Tapping w/Braking System*;-Union for Multi-Spindle Head*;-Pneumatic Counter Balance*;-7.8" Column Riser*;-Motor, 1200 RPM*;-Motor, 3600 RPM*;-Motor, 900/1800 RPM*;-Motor, 1800/3600 RPM*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

We add hundreds of new listings every week. Be sure not to miss any Clausing SX40RS by subscribing to our email updates.

We also send announcements for upcoming auctions for Metalworking Machinery.

We hate spam as much as you do

None