Listings similar to "CNC lathe Gildemeister MD3" 60

Made in: 2004 Characteristic: Control system: MAZATROL 640 T Max. turning diameter: 276 mm Turning diameter over bed (max): 300 mm Maximum t…

VEB WZM Meuselwitz (WMW) parallel four-guideway DXWD 1800/2 CNC lathe Maximum loadable weight (capacity between centers) t 80 Machine weight t 16…

Characteristic: Control system: Fanuc MSX-501III Total hours: 58953 h Hours on: 4810 h Maximum-turning length: 485 mm Turning diameter over…

Used DMG MORI SEIKI (GILDEMEISTER) CTX - 600 S2 CNC Lathe - Type: CTX - 600 S2 - Producer: DMG MORI SEIKI (GILDEMEISTER) - Made in: 2000 Cha…

Multispindle lathe Chip conveyor. Accessories. Length: 4700 mm Width: 1200mm Min/Max height: 1700 mm this extra information is standard for t…

Made in: 2005 Characteristic: Maximum turning diameter: 350 mm Maximum-turning length: 606 mm Maximum power of the main spindle: 15 kW Maxim…

Gildemeister As32 working. Machine is in operation but disconnected Used to process stainless steel and automatic steel Few spare parts available …

Made in: 2001 Characteristic: Control system: MAZATROL 640 T Total hours: 99006 h Maximum length of the turning: 700 mm Max. turning diamete…

Made in: 2001 Characteristic: After GO Control system: HAAS Spindle bore: 65 mm Maximum-turning length: 660 mm Number of tools in the maga…

Year of manufacture: 2000-2001 Installation and commissioning: 2002 Control system: Fanuc 18 iTA Number of controlled axes: 5 Diameter of machine…

Control system: Fanuc 16i-TB Maximum rod diameter with internal feed: 22 mm Adding the machine: Guide tube for 3 m field Internal feeding Equipm…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

Control Heidenhain Eltropilot with new screen 8xvxsy8pfu rotation diameter 570 over bed turning length approx. 600 mm (approx. estimation) spindl…

Made in: 2001 Characteristic: Control system: FANUC PNC DECO Max. bar diameter: 10 mm Maximum bar length: 2000 mm Maximum-turning length: 18…

Manufacturer: Gildemeister Model GDM 90 MC CNC Control: Eltropilot Y.O.M.: 1992 Operating hours: 17.235 Condition Optically-mechanically excelle…

Type: MASTURN MT 54 Producer: MAS Made in: 2003 Characteristic: Control system: Heidenhaim TE 4110 MP Maximum-turning length: 800 mm Max. tu…

Type: Compact A35 Producer: Kovosvit Made in: 2005 Characteristic: Control system: Fanuc 16i-TB Total hours: 18658 h Hours on: 10202 h Max…

The GILDEMEISTER CTX 420 V6 LINEAR CNC lathe, built in Germany in 2007, processes details with a maximum length of 600 mm and a diameter of 565 mm (o…

Type: BS18-III Producer: Tsugami Mori Made in: 2000 Characteristic: Control system: Fanuc 18 iTA Total hours: 45008 h Hours on: 21537 h Ma…

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special …

Spindle Hole Diameter 5.3" Bar Capacity, Maximum 4.75" Swing Diameter, Maximum 31.5" Swing Over Saddle, Maximum 19.68" Turning Diamet…

Made in: 2007 Characteristic: Control system: FAGOR Maximum-turning length: 1000 mm Turning diameter over bed (max): 550 mm Turning diameter…

Turning and milling center. The basis of the machine is a uniform bed made of mature gray cast iron, ensuring high rigidity and precision during mach…

Made in: 1996 Characteristic: Control system: FANUC Series 20 T Total hours: 7352 h Maximum-turning length: 500 mm Turning diameter over bed…

Made in: 1990 Characteristic: Max. bar diameter: 25 mm Number of spindles: 6 pcs Length: 6150 mm Width: 1610 mm Height: 2015 mm Weight: …

Year of manufacture: 1999 - a machine with a long history of reliability. Control system: Traub TX 8H – modern and intuitive control. Operating vol…

Characteristic: Control system: Mazatrol T Plus Hours on: 8305 h Maximum-turning length: 720 mm Turning diameter over bed (max): 315 mm Max…

Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm W…

Made in: 2000 Characteristic: Control system: FANUC Series 18-T Spindle bore: 30 mm Travels of X: 300 mm Travels Z: 280 mm Length: 2800 mm…

Type: CTX alpha 500 Producer: DMG Gildemeister Made in: 2008 Characteristic: Control system: Siemens 840 Total hours: 22803 h Hours on: 1150…