Listings similar to "CNC Vertical turning lathe Emag VSC 250 Twin" 60

Manufacturer: Seiger Type: SLZ 850 Year of construction: 2004 Turning diameter over bed: 1000 mm Turning length: 4500 mm Center distance: 4500 m…

Made in: 2004 Characteristic: Control system: MAZATROL 640 T Max. turning diameter: 276 mm Turning diameter over bed (max): 300 mm Maximum t…

Manual turning for single workpieces Step-By-step operations (cycle) for small batch sizes CNC mode for larger batch sizes Mehanite rigid box type…

Characteristic: Control system: Fanuc MSX-501III Total hours: 58953 h Hours on: 4810 h Maximum-turning length: 485 mm Turning diameter over…

Used DMG MORI SEIKI (GILDEMEISTER) CTX - 600 S2 CNC Lathe - Type: CTX - 600 S2 - Producer: DMG MORI SEIKI (GILDEMEISTER) - Made in: 2000 Cha…

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, INCLUCING: 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BM…

Swing Over Front Apron 23″ Swing Over Cross Slide 9.…

Max turning diameter 32 mm. Max turning length 320 mm. Max diameter: front drilling 12 mm. – M10-M8 front tapping. – M8 rear drilling. Max speed: …

Made in: 2001 Characteristic: Control system: MAZATROL 640 T Total hours: 99006 h Maximum length of the turning: 700 mm Max. turning diamete…

Made in: 2005 Characteristic: Maximum turning diameter: 350 mm Maximum-turning length: 606 mm Maximum power of the main spindle: 15 kW Maxim…

22367 Mazak Multiplex 4200 Dual Spindle CNC Lathe Model: Multiplex 4200 sn:165989 mfg.2003 Specifications: Max. Turning Diameter: 12.6” Max.…

Siemens 820 CNC Control Maximum Swing Over Bed 32” Maximum Turning Diameter 24” Maximum X Axis Travel 15” Maximum Distance Between Centers 40” M…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

Made in: 2001 Characteristic: After GO Control system: HAAS Spindle bore: 65 mm Maximum-turning length: 660 mm Number of tools in the maga…

Year of manufacture: 2000-2001 Installation and commissioning: 2002 Control system: Fanuc 18 iTA Number of controlled axes: 5 Diameter of machine…

Control Heidenhain Eltropilot with new screen 8xvxsy8pfu rotation diameter 570 over bed turning length approx. 600 mm (approx. estimation) spindl…

Type: Compact A35 Producer: Kovosvit Made in: 2005 Characteristic: Control system: Fanuc 16i-TB Total hours: 18658 h Hours on: 10202 h Max…

Type: MASTURN MT 54 Producer: MAS Made in: 2003 Characteristic: Control system: Heidenhaim TE 4110 MP Maximum-turning length: 800 mm Max. tu…

Technical data Taper in spindle A2-5 Spindle hole 51 mm Turning diameter 300 mm Bar diameter with collet 24 / 36 mm Carriage: Longitu…

CNC Lathes Y Axis Capability Full C Axis Spindle Rotation Live Milling/Drilling Capability B Axis Pendulum Head B-Axis Contouring - 0.0001 Degr…

Machine Type: CNC Lathes Year: 2004 Manufacturer: Okuma Model: LT200-MY Twin Star Control: OSP E-100L Condition: Very Good Under Po…

Made in: 2001 Characteristic: Control system: FANUC PNC DECO Max. bar diameter: 10 mm Maximum bar length: 2000 mm Maximum-turning length: 18…

Turning and milling center. The basis of the machine is a uniform bed made of mature gray cast iron, ensuring high rigidity and precision during mach…

Type: BS18-III Producer: Tsugami Mori Made in: 2000 Characteristic: Control system: Fanuc 18 iTA Total hours: 45008 h Hours on: 21537 h Ma…

Year of manufacture: 1999 - a machine with a long history of reliability. Control system: Traub TX 8H – modern and intuitive control. Operating vol…

Made in: 2000 Characteristic: Control system: FANUC Series 18-T Spindle bore: 30 mm Travels of X: 300 mm Travels Z: 280 mm Length: 2800 mm…

Controller : FANUC 18-T Number of axis total 2 Number of spindles 1 Number of revolvers 1 Distance between centres 375 mm Swing diameter ov…

Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm W…

(2) 12 Positions Upper Turrets w/ Y-Axis Both (1) Lower Turret with 12 Positions - Live Tools Twin Spindle Design Full C Axis on Both Spindles Li…

Made in: 2007 Characteristic: Control system: FAGOR Maximum-turning length: 1000 mm Turning diameter over bed (max): 550 mm Turning diameter…