DMG MORI DMC 1150 V Machining center - vertical

Listing description

Basic machine
DMC 1150 V
Control CELOS with Siemens 840D sl Operate
Options working table
Preperation for NC-Devider EA510 indirect
Cooling media / chip removal
Swarf conveyor (scraper type)

4rth axis ready
Measuring
Infrared measuring probe PP 60 optical
CELOS Products
NETSERVICE (CELOS)
SERVICE AGENT (CELOS)
MESSENGER (CELOS)
Vertical-Machining centre DMC 1150 V New DMG MORI Design
X = 1150 mm, Y = 700 mm, Z = 550 mm X = 43,30 in, Y = 27,55 in, Z = 21,65 in
42 m/min // 137,7 ft/min Rapid feed Speed range 20 - 14,000 rpm
InLine spindle 20,3/14,5 kW // 27,22/19,44 hp (40/100% DC)
Tool taper ISO40/SK40 DIN69871 Tool clamping according to DIN69872
Toolchanger 20 places SK40 (Disk with pockets and Double gripper equipment)
Table dimension 1460 x 750 mm // 57,48 x 29,52 in Direct Measuring system X,Y,Z
CELOS® with Siemens 840D sl Operate includes 21,5“- ERGOline® Control with Multi-Touch-Screen.
APPs simplify machine operation and support integrated management, documentation and visualization of orders, process and machine data.
Interactive with CAD / CAM and compatible with PPS / ERP.
Preparation for NC-Divider EA510 with indirect measuring system
Swarf conveyor (scraper type) discharge height 950 mm // 37.40 in
Screen text german/english
 
Working area:
Travel range: X = 1150 mm, Y = 700 mm, Z = 550 mm
 
Distance spindle nose - table: 150 to 700 mm
Clamping area table: 1400 x 750 mm (55,11 x 29,52 in)
with 7 slots in a distance of 100 mm (3.94 in) (slot in the middle 14H7 and 6 slots 14H12)
Maximum table load: 1500 kg
 
Feed drives:
Mode of drive: digitally controlled AC-motors, ball screw drives
Feed rate: X, Y, and Z axis maximum 36,000 mm/min // 118 ft/min
Rapid traverse rate: X, Y, and Z axis 36 m/min // 118 ft/min
Max. feed force: X, Y, and Z axis 6.5 kN // 1,461 lbs

The accuracy is strongly dependent on the external thermic
influences. The highest accuracy will be achieved in a temperature range of + 20 °C /-2 °C. Direct solar radiation, strong draft, vibrations by external units and heat accumulation should be avoided.
 
Main drive:
Mode of drive: AC motor digitally controlled and liquid cooled with flange mounted spindle cartridge
Speed range standard: 20 - 14,000 rpm
Cooling AC main drive: water circulation cooling (heat exchanger)
Drive capacity: 20,3 kW // 27,22 hp (40% DC)
14,5 kW // 19,44 hp (100% DC)
Max. spindle torque: 121 Nm // (40% DC)
84 Nm // (100% DC)
Tool clamping force: 10 kN //
Tool taper: SK40 DIN69871
Pneumatic unclamping unit for pull studs DIN69872
Lubrication: permanent grease lubrication
chip conveyor (scraper type) including coolant tank
delivery volume: approx. 40 l/min at 2 bar (10.6 gallon/min at 29 psi)

This equipment is located in GR