Dmg Mori Seiki Nzx 2500 2015

Listing description

machine specification

swing over bed
780 mm (30.7”)

shank height for square tool
25 mm (1.0”)

shank diameter for boring bar
50mm (2.0”)

turret indexing time
0.2 sec

x1 axis
25,000 mm/min (984.3 ipm)

x2 axis
25,000 mm/min (984.3 ipm)

z1 axis
30,000 mm/min (1,181.1 ipm)

jog feedrate
196.9 ipm <20 steps>

tailstock travel
600mm (23.6”)

tailstock spindle diameter
100mm (4.3”)

tailstock spindle travel
150 mm (5.9”)

turret 2
8-station

turret 1
12-station

number of tool slides
2

max turning length
600mm (23.6)”

x-axis travel (turret 1)
225 mm (8.9”)

x-axis travel (turret 2)
170 mm (6.7")

z-axis travel (turret 1)
650 mm (25.6”)

z-axis travel (turret 2)
650 mm (25.6”)

max spindle speed
5,000 rpm

spindle nose
a2-6

through spindle hole diameter
73mm (2.9")

spindle bearing inner diameter
120 mm (4.7")

chuck
10" hollow

coolant tank capacity
105.6 gal.

max. turning diameter turret 1
370 mm(14.5”)

max. turning diameter turret 2
260 mm (10.2")

z2-axis
30,000 mm/min (1,181.1 ipm)

built-in center
mt4

machine equipped with

5000 rpm spindle
through-spindle hole dia. 2.9"
10" kitagawa hollow chuck unit
tailstock spindle built-in center mt4
air gun
chip conveyor

machine description

this used five-axis mori seiki cnc lathe features a 30.7" swing over bed, a max turning diameter of 14.5" (turret 1), max turning diameter of 23.6" (turret 2), and a 10" hollow chuck. this lathe also comes equipped with a12 tool stations on turret 1, and 8 tool stations on turret 2. the machine was new in 2015. for more information call us at 312.226.4150.

This equipment is located in US