DO-ALL DC-500SA

Listing description

the dc-500sa semi-automatic continental seriest of high production, horizontal

band saws by doall are designed for cutting a wide range of metals on a

production basis. while doall semi-automatic saws do not offer an auto-

indexing, they do cut single pieces extremely efficiently. if you have

operations that do not require indexing, high production or automatic cutting

cycles, an affordable doall semi-automatic saws is the perfect choice. once

you have set your desired feed rate, blade speed and initial vise opening, a

cut is complete, the band shuts off and the head returns to the upright open

position and locks. then the operator must manually reposition the material

for another cut. semi-automatic operation also increases blade life and

cutting accuracy as the operator is not manually pressuring or overloading the

saw blade during the cut.

cutting capacity round: 20" (500mm)
cutting capacity rectangle: 20 x 22" (500x560mm)
maximum nesting capacity: 18.9 x 9.4" (480 x 240 mm)
minimum nesting capacity: 9.4 x 3" (240 x 80 mm)
band saw blade (l x w x gage): 215 x 1-1/2 x 0.05" (5450x41x1.3mm)
band speed: 52-430 fpm (16-128mpm)
band drive motor: 10 hp (7.5 kw)
hydraulic pump: 2 hp (1.5 kw)
hydraulic tank capacity: 29 gal (110 lit)
coolant motor: hp (0.2 kw)
coolant tank capacity: 29 gal (110 lit)
material pass line height: 29.5" (750 mm)
floor space required (l x w x h): 114 x 61 x 71" (2890x1550x1800mm)
machine weight: 5732 lbs (2600 kg)

This equipment is located in US