Listings similar to "Doosan Puma 350" 60

Very good condition, little used ! Machine comes from a factory closure. * CNC control FANUC 0i-TD * C axis * 12-pos turret with powered posi…

This machine is in great condition, running in a single shift environment cutting mostly aluminum and mild steel. We are the original owner, and hav…

Characteristic: Control system: Fanuc MSX-501III Total hours: 58953 h Hours on: 4810 h Maximum-turning length: 485 mm Turning diameter over…

Catalog No. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Made in: 2018 Characteristic: Control system: DOOSAN FANUC-i Total hours: 8205 h Ma…

Catalog No. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Made in: 2013 Characteristic: Control system: FANUC 31i-B Total hours: 8981 h Max…

Swing Over Front Apron 23″ Swing Over Cross Slide 9.…

Year 2010 CNC Control yes Type of CNC Control Fanuc 0i-TD # Axis 4 Swing 33.5 inches Turning Diameter 16.5 inches Center Distance 123 inc…

Made in: 2013 Characteristic: Control system: FANUC Maximum-turning length: 562 mm Max. turning diameter: 390 mm Turning diameter over bed (…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

Excellent Condition 1773 Hours 4,500 RPM Main Spindle 6,000 RPM Sub Spindle 6,000 RPM Live Tool Holders ML3 580 BarFeeder 8" Main Chuck 5" Sub …

Feeder lathe Traub Tnl 32G + FMB turbo 5-42 The machine is from 1996. The machine tool has two eight-tool turrets, including one fixed and one to…

Okuma CNC in good condition model LB 25

Made in: 2014 Characteristic: Control system: FANUC Maximum travel length in the X-axis: 205 mm Maximum travel length in the Y-axis: 105 mm …

Year 2020 CNC Control yes Type of CNC Control Fanuc i # Axis 4 Swing 30.7 inches Turning Diameter 14.8 inches Center Distance 50.4 inches…

Manufacturer: Gildemeister Model GDM 90 MC CNC Control: Eltropilot Y.O.M.: 1992 Operating hours: 17.235 Condition Optically-mechanically excelle…

Multi axis 5 axis simultaneous Capto C63 tool holder Number of magazine: 40

Chuck size 6″ Swing over the bed 21.7" Swing over cross slide 13.8" Maximum turning length 11.8" Bar capacity 1.77" Travel x 8.3" Travel z 13" …

Catalog No. : 7399 Type: PUMA 3100 Producer: DOOSAN Made in: 2015 Characteristic: Control system: FANUC Maximum-turning length: 760 mm Max.…

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special …

Basic Specifications – 600mm Swing Over Bed – 400mm Swing Over Saddle – 510mm Turning Length – 300mm Turning Ø – 105mm (±52.5mm) Y Axis Travel …

CNC LATHE Control system: Siemens Sinumerik 840C / C200-4 Bar passage: 60 mm Spindle speed: 5000 rpm Main spindle motor power: 29/20 kW TURRET 1…

Make Doosan, made in Korea Model S 550L Year 2000 Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length …

HAAS “BIG-BORE” CNC TURNING CENTER New November 2001, Model SL30TB EQUIPPED WITH: Haas CNC Control 4″ Big Bore Drive System Collet Chuck – 12-Po…

Fanuc 10T Control Swing Over Bed 20.5″ Maximum Turning Diameter 13.4″ Maximum Turning Length 20.9″ Swing Over Cross Slide 13.8″ Distance Between…

High-producticity turning center Twin opposed spindles Upper and lower turrets For machining complex parts with 24 position tool position with num…

Eurotech Model E-42S Slant Bed CNC Lathe With Sub Spindle   Max Turning Diameter: 8.7" Max Machining Length: 14.96" Max Swing: 15.74" …

WELL DESCRIPTION: Turning center with max. turning 550 mm; max. length 1020 mm; turning diameter from bar 76 mm; X, Z strokes: 555 x 1095 mm; Y axis …

HORIZONTAL LATHE DOOSAN PUMA MX2500LST. MAX. ROTATION DIAMETER: 750 MM MAX.TORNIBLE DIAMETER: 680 MM TORNIBLE LENGTH: 1195 MM CNC: FANUC 18i-TB…

CNC Lathe make: Weiler model: E 80/3 year of manufacture: 1996 type of control: CNC country of origin: Germany freight basis: ex location Grimm…