58 Tonnes Up to 393 kW Up to 225 kw 140 bar 0.0313/0.164m/sec 1.55kg/cm2, 480 Volts, 3 Phase, 60 Hz, 400 Amps - Powerful, robust, compact design Low machine height - Designed for development or production work, this powerful single boom machine is ideal for operating in areas of restricted height. - The LH 1300 series has developed from the original LH 1300 model and incorporates greater cutting forces from a single or two speed boom assembly. Only 266 Meters of 3.5 Meter Tunnel Work on Machine - Includes 2 Speed Cutter Head - Electric Cutter Head Motor and the Electric Hydraulic Drive Motor are Equipped with Water Jacketed Cooling - Includes Water Cooled Heat Exchanger Unit was Completely Refurbished, Including the Following Major Work: - Feb. 2015 - Installed New Cutter Head Electric Drive Motor - Feb. 2015 - Rebuilt Cutter Head Bearing Box - Apr. 2015 - Installed New C/V Joint and Drive Shaft for Chain Conveyor and Apron Feeder Gear Drive - Apr. 2015 - Replaced Right Track Idler Bearings, including Seals and Guide Cap - July 2015 - Rebuilt Left Track Idler, Bears, Seal, Axle Pin with New Guide Caps - July 2015 - Rebuilt Under Carriage (18 New Under Carriage Rollers with Bushings, 8 New Upper Track Rollers with Bushings, 26 New Roller Pins, New Roller Retaining Block Plates, 4 New Track Drive Sprockets, 140 New Track Pins and Track Pad Repairs) - Oct. 2015 - Installed 2 New Cutter Head Boom Hydraulic Cylinders. Unit has low hours, was well maintained, refurbished and is in Ready to Work Condition.